Shaw Industries RFID Implementation For Supply Chain Value

Shaw Industries Group, Inc. partners with ODIN to implement RFID technology at 37 of its distribution sites around the United States. This implementation brings the total number of RFID-enabled sites to 40 for Shaw. ODIN helped Shaw to pilot RFID for supply chain visibility and retailer compliance in 2006. Shaw understands the ROI of an RFID-enabled supply chain system and is implementing RFID across its US distribution network. Supply chain visibility will drive operational efficiency and improve customer service. ...

... "ODIN technologies is currently deploying an RFID enabled Master Bill of Lading tracking and visibility system that was originally piloted in 2006. With the system, Shaw has real time visibility into the status of trucks and customer orders in its distribution network. This will allow Shaw to be more effective and also provide their customers with accurate feedback on order shipment status. The Master Bill of Lading system will be deployed at an additional seven primary Distribution Centers (DCs) and an additional 30 regional DCs located across the country. ODIN technologies deployed RFID printers and customized secure RFID enclosures. The acceptance testing protocol documented 100% read rates in the pilot and is fully integrated into MQ Series and Shaw’s legacy systems. " ...

Via ODIN technologies: Shaw Industries RFID Implementation

Active RFID Technology Secures Port of Oakland

WhereNet Corp. will assist the Port of Oakland in meeting security requirements of the U.S. Department of Homeland Security (DHS) by implementing a truck RFID tagging system at one of its most active marine terminals. Drayage trucks at the Oakland International Container Terminal (OICT) will be equipped with WhereNet active RFID tags. ...

... "The Port of Oakland has purchased 1,700 WhereTag active RFID transmitters and is contracting with WhereNet and eModal to distribute the tags to drayage companies that serve the OICT, which is operated by Stevedoring Services of America Terminals (SSAT). WhereNet has completed installation of RFID readers at OICT and drivers using that terminal are already voluntarily installing the tags on their truck cabs. When a driver arrives at the terminal and approaches security, a transmission from the WhereTag is picked up by the WhereNet Real-Time Locating System (RTLS) infrastructure of antennas installed at each marine terminal and automatically cross-references with the information available through the eModal trucking database, ensuring that only authorized vehicles are granted entry. The Port of Oakland's security initiative should be bolstered by the recent DHS decision, announced on January 9, 2007, to award increased grant funding to help secure California ports this year. " ...

Active RFID Technology Improves Security at Port of Oakland

RFID Tags Diabetes Patients

VeriChip tags 18 diabetic patients with its RFID-enabled VeriMed Patient Identification System at the Atlanta Diabetes EXPO, under sponsorship of the American Diabetes Association (ADA). ...

... "At the EXPO, physicians implanted VeriMed RFID microchips in conference attendees who signed up for the voluntary procedure. The VeriMed Patient Identification System, which utilizes an implantable RFID microchip in combination with a handheld RFID scanner and a secure patient database, provides immediate access to important health information for patients who arrive at an emergency department unable to communicate. " ...

Via VeriChip: Diabetic Patients RFID Tagged with Microchip ...

RFID-Enabled Data Center: Tape Location

Imation teams with B&L Associates, Inc. to deliver an RFID-enabled tape tracking system. Imation's DataGuard system is integrated with B&L's VaultLedger or Vertices software to support data administrators work processes: storage, protection, tracking and instantly location of th audit trail of every data cartridge in their data center's tape libraries. ...

... "With RFID-tagged labels affixed to each tape cartridge, administrators can easily check-in and check-out each cartridge via entry and exit workstations. The cartridges -- or case of cartridges -- are then tracked via the B&L VaultLedger or Vertices software. " ...

B&L Associates Partners with Imation to Deliver Next-Generation Tape Tracking System Software

Retail RFID Implementation: European Shoes

Checkpoint Systems enters into a strategic agreement with RENO, European shoe retailer. The agreement will enable an RFID source-tagging program and implementation at 700 retail locations across six countries with NDRF-based (New Digital Radio Frequency) RFID tagging system. The implementation will be completed in May. The RFID system will support reduction of shrinkage and improvement of the customer experience. ...

... "Switching from EM to NDRF technology, RENO wants to further optimise both its market presence and its operational processes. To be successful in the shoe retail trade the goods have to be presented in the right way. As well as displaying shoes in pairs and in boxes, an open shop construction is also particularly important, says Konigs. With NDRF, the current aisle widths in the branches could be increased from 90 cm to 1.80 m and a more customer friendly entrance introduced. Further improvements in the business process include simpler deactivation of the tagged goods at the point of sale. The cashier transaction is sped up while it guarantees that no customer will leave the store with a tag that accidentally remains activated, thereby triggering a false alarm. RENO's decision for radio-frequency source tagging is a further step towards a uniform standard in security technology, not only in Germany, says Ulrich Schafer, Vice-President and General Manager NCE Unit, of Checkpoint Systems. For retailers, radio-frequency source tagging is the best option for reducing the costs of shrinkage. At the same time they are able to create a customer-friendly shopping atmosphere, which will help to boost sales. " ...

Via Checkpoint Systems: RENO Partners with Checkpoint Systems for Its Source Tagging Programme

Bookseller RFID Enables Growth

Bookseller implements RFID technology from its supply chain throughout the customer experience and shows increased sales. ...

... "Selexyz, the Netherlands's largest book chain, has been testing an RFID inventory-management system at an outlet in the town of Almere. " ...

Via CNN-Money: Bookseller uses RFID technology

Robot RFID Asset Management for Hospitals

Aethon Inc makes availabile its mobile RFID-enabled solution that locates, delivers and recovers hospital assets. The solution performs automated transportation featuring an RFID-based asset tracking system and a robotic asset delivery and recovery system. The solution helps hospitals to improve efficiency and patient satisfaction, increase utilization of assets, and improve regulatory compliance. ...

... "HOMER's unique asset tracking capabilities are an outgrowth of technology made possible by TUG, the most successful automated courier system for the delivery and recovery of hospital goods and supplies. Leveraging the TUG platform, HOMER employs a single mobile antenna that eliminates the typical infrastructure hurdles of competitors’ systems. This translates into more efficient organization and location of pumps, wheelchairs, monitors, respirators, beds and virtually any other assets hospitals are interested in tracking. A cost-effective and comprehensive solution, HOMER can seamlessly merge with existing hospital systems and requires minimal installation. HOMER works with active RFID tags (unique identifiers). Because it can use any third-party tag, HOMER is tag independent. Furthermore, HOMER can be integrated into existing asset management software. Aethon provides installation, tag selection and setup, software integration, training and support. TUG is an autonomous mobile robot that requires no extra infrastructure investment, is simple to install and has many applications such as central supply, dietary, pharmacy, laboratory, medical records, nursing and linens. Currently, the TUG delivery and recovery system is being used in hospitals across 75 sites. Many hospitals have deployed multiple TUGs to save time and money, while increasing staff and patient satisfaction. " ...

Via Aethon: Aethon Redefines Hospital Asset Utilization ...

RFID Track Trace Financial Logistics

SecurCash implements RFID-ready track and trace system, from Transtrack International and Capturetech, to manage dynamic cash logistics and monitor cash transports closely for efficiency and security. ...

... "With the implementation, SecurCash is ready for future RFID technology. RFID makes it possible to work more flexibly and securely. RFID ensures all details of cash transport are registered through reading a chip. This makes the presence of personnel in the transfer of packages partially obsolete. In addition, pay-in safes can independently indicate using specific parameters when a cash transport is required. RFID technology enables SecurCash to use routes dynamically, which benefits security. " ...

Via SecurCash: Tracking & Tracing Prepares Cash Transport for the Future

RFID Patent iCE Invention Bridges Tags

Syscan receives broad patent for iCE technology from Canadian Patent Office. ...

... "Syscan believes that iCE is a significant leap forward in the evolution of RFID (Radio Frequency Identification); not only for the Company's selected verticals in agriculture, pharmaceuticals and the military but throughout the entire spectrum of RFID. With iCE, the real-time desktop monitoring of remote assets can be significantly enhanced and the much predicted internet of things made more functional.

Syscan's iCE invention was developed using an energy-efficient dynamic bi-directional communications protocol that employs transmission windows to dramatically reduce the power consumption of Tag batteries, which comprise a major portion of the per-Tag cost. iCE Readers can access Tags that would normally be out of range by substituting other Tags that are within reach to temporarily act as communication bridges to relay data to the Reader. The architecture of the iCE RFID network can be defined by the Reader or the Tags according to their positions and characteristics. Once configured, the system is equipped with enough intelligence and is sufficiently dynamic to enable it to operate by itself without human intervention, regardless of whether or not there is a change in the position of the Tags or in their environment. " ...

Via Syscan: Syscan's Breakthrough RFID Technology Approved for Patent

Russia RFID Transportation Application: Moscow Metro

UPM Raflatac will supply RFID inlays for contactless passenger tickets on the Moscow Metro. The RFID inlays will be supplied in cooperation with Moscow-based Comvision Russland for ticket converting at JSC Mikron. ...

... "The Moscow Metro is one of the world's most heavily used metro systems, carrying 8.2 million passengers on a normal weekday. The RFID inlays provided by UPM Raflatac will replace the cards with magnetic stripe Moscow Metro is currently using for tickets with a fixed number of journeys. For seasonal tickets, the Moscow Metro is already using contactless RFID smart cards which enable significantly faster entry for passengers. The Moscow Metro was the first metro system in Europe to implement smart cards together with a new type of magnetic card in 1998. In the first stage, the monthly usage of UPM Raflatac HF inlays based on the Mifare Ultralight standard will be 5 million pieces. After a transitional period at the end of summer 2007, usage will rise to approximately 30 million inlays per month. " ...

Via UPM Raflatac: UPM Raflatac supplies RFID inlays for Moscow Metro contactless tickets ...

RFID Research Intermec NASA Collaborate

NASA and Intermec will collaborate to research new automated identification technology, such RFID that can function on space vehicles. Tests are planned to verify the application of RFID to parts identification. The Marshall Space Flight Center in Huntsville, Ala., is one of NASA's largest and most diversified installations. ...

... "Intermec announced a cooperative research effort with the NASA George C. Marshall Space Flight Center to investigate new Automatic Identification Tracking (AIT) System technologies. New technologies to be developed will qualify machine-readable symbol markings and RFID devices for use on space-borne vehicles.

Intermec also will prepare additional marked samples and soft and rigid RFID tags to be included in MISSE 6, scheduled for July 2007. The part identification markings and tags - which remain readable after exposure to the extreme levels of ultraviolet radiation, atomic oxygen, hard vacuum, and contamination in low earth orbit - will be evaluated and then certified for use on future space vehicles and added to NASA's part identification requirements. " ...

Via Intermec: Intermec Partners with NASA to Research New Automated Part Tracking Technologies for Space-Borne Vehicles

RFID Supply Chain Implementation at SSA: Intermec Technology Deployed

Intermec implements RFID (radio frequency identification) technology for the United States Social Security Administration, that improves data collection accuracy and reduces labor costs. The SSA automated data collection in its warehouse and supply chain which resulted in accurate data and increased customer service performance. A 70% labor savings is targeted in its inventory management processes. ...

... "The SSA deployed Intermec RFID hardware in its Supply Chain Management program to fulfill more than 42,000 orders for forms, publications and other documents each year and ship 240,000 line items to SSA office locations worldwide. Operating from an 80,000 square-foot supply building at SSA headquarters in Woodlawn, Md., the agency implemented a paperless warehouse management control system upgrade that integrates the Intermec IP3, IP4 and 1555 portable RFID readers and PM4i printers with RFID software from System Concepts and warehouse management system software from Radio Beacon. The system tracks and validates each warehouse operation and incorporates workload scheduling software to optimize employee productivity and provide control over the inventory management processes. " ...

Via Intermec: Social Security Administration Uses Intermec RFID Technology to Improve Data Collection Accuracy, Reduce Labor Costs ...

RFID Transportation Logistics Solution

Datatrac adds Radio Frequency Identification Data (RFID) collection capabilities to the eTrac shipment tracking system in partnership with Psion Teklogix and KonaWare to enable real-time track and trace capabilities for logistics. ...

... "By leveraging cutting-edge RFID equipped handheld computers from Psion Teklogix and KonaWare's Mobility Platform, Datatrac's eTrac system automatically tracks complete shipment information in real-time from order entry through delivery, invoicing, reconciliation and settlement. Users can now track packages with increased accuracy and obtain specific shipment custody information. Moreover, the RFID capabilities work seamlessly with existing Datatrac systems. " ...

Via TechLinks: Datatrac Enhances Transportation Logistics Solution with RFID Technology ...

RFID Wristband Point-of-Sale Ski Application

Precision Dynamics implements Smart Band RFID Wristband System at Sno Mountain, formerly Montage Mountain, in the Pocono Mountains, Pennsylvania. Denis Carlson, President of Sno Mountain, sees the RFID technology as a competitive differentiator for its customer experience, and has potential to increase revenue through cashless point-of-sale transactions. ...

... "The RFID wristband system provides added conveniences to guests including automated ski lift tickets and cashless point-of-sale (POS). Purchasing food and beverages at the ski park is a breeze using Smart Band's contactless payment feature. Guests can load money onto their wristband at POS stations using cash, credit or debit cards. Smart Bands work well in any environment-wet or dry-making them a great addition to any ski resort. " ...

Via Precision Dynamics Corporation: Sno Mountain Implements Precision Dynamics' Smart Band RFID Wristbands for Automated Ski Lift Passes and Cashless Point-of-Sale ...

3M RFID Library Productivity

3M Library Systems introduces new features into its workstations that make them fast, reliable and easy-to-use RFID products in the library environment. ...

... "Like its 3M predecessor model, the 3M Model 946 - with its ergonomic design - performs checkout or return in one step, combining RFID item identification and Tattle-Tape Security Strip from 3M in the same operation. The system also can perform bar code-to-RFID conversions for new acquisitions and smaller scale collections. For visual and audio media, it enables staff to verify that the case and item within match, without opening the case, and can confirm the presence of a sensitized Tattle-Tape Security Strip by means of a verifier light. Also introduced today was the 3M Conversion Station Model 812, an improved self-contained portable system for rapidly scanning bar codes and converting the data for RFID. Compared to its predecessor model, it contains a larger touch-sensitive screen, an easier-to-load 3M RFID tag dispenser, and the capability of converting all 3M RFID tag formats. Similar to its predecessor, 3M Model 812's sophisticated laser scanner is effective for virtually any bar code location or orientation, and provides a visible scan line that helps the user place items correctly. Because it does not require connection to an automated circulation system, the workstation can be easily moved on its cart for use in the stacks. The station also can reprogram RFID tags as items change. " ...

Via 3M Library Systems: 3M Unveils Two Advanced RFID Workstations with Additional Enhancements for Productivity and Security ...

Libraries are increasingly using RFID technology to manage their processes. ...

3M: Wyoming's Largest Public Library Chooses 3M RFID for Expanded Facility:

... "With the 3M RFID system, everything in the library's collection is affixed with an RFID tag. The tag contains a tiny antenna and a memory chip that stores information about each item's identity and allows accurate identification and tracking. A cordless, handheld scanner reads the tags, enabling library staff to easily locate, inventory, check in and check out materials. Unlike barcode systems, RFID does not require line of sight between the tag and the scanner, resulting in easier, more efficient tracking. " ...

Lower RFID Pricing: Inventory Solutions

Axcess reduces pricing for its Radio Frequency Identification (RFID) enabled asset management solution, called Asset Activator, in order to support faster return on investment for its customers. ...

... "The unique active RFID system automatically provides precise automatic location determination, tracking, inventory counts, and physical protection for all types of enterprise assets. The reduced pricing is designed to generate an ROI for the customer of less than six months for all system sizes. The low cost RFID asset management solution enables corporations to manage assets and effectively protect intellectual property and customer privacy data. Corporations can more easily comply with state personal privacy notification laws. AXCESS' unique solution provides both management and security in one standalone package which is also capable of interfacing with the full range of existing enterprise systems. Asset Activator is installed and operating in several corporate facilities worldwide. " ...

Via Axcess: AXCESS Introduces Scalable System Pricing for RFID Physical Asset Inventory and Security Solution ...

RFID Shipment Tracking and Detection

Pliant implements IBM-designed RFID (Radio Frequency Identification) platform pilot program, that tracks shipments between technical centers and customer sites. The RFID system detects tampering in shipped products and enables workforce mobility using handheld devices to track products. Potential tampering can be identified and addressed in real-time. ...

... "IBM Global Business Services consultants collaborated with Pliant to develop a comprehensive RFID technology roadmap, helping Pliant prepare and validate the RFID equipment in its labs. Pliant's IBM software and solution, which has been in place since December 2005, leverages IBM's Data Collection Server software and WebSphere RFID Device Infrastructure. The software installed on Pliant's network helped to create RFID labels which were printed and deployed on pallets and the pallets were tracked as they moved between the two Pliant technical centers in Newport News, Virginia and Chippewa Falls, Wisconsin. IBM consultants worked with Pliant to create Web pages on a network database to track the content and movement history of each pallet so that its location was always known.



A wireless handheld RFID reader loaded with the WebSphere RFID Device Infrastructure used to scan the pallets within the plants to immediately look up pallet content information. With the support provided by the IBM Global Business Services team, Pliant now has a proven product concept to access to real-time tracking information for shipments between its two facilities. This setup allowed Pliant to download and monitor critical information which helped protect business-critical applications. " ...

Via Pliant Corporation: IBM Helps Pliant Design and Implement RFID System to Track Shipments and Detect Tampering ...

RFID Ink Tattoo

Somark is a technology company located at the Center for Emerging Technologies and is
developing a proprietary ID system based on a biocompatible ink with chipless RFID functionality. The company has successfully tested RFID ink in animals, which proves that ink can be delivered and read. The primary application of the RFID ink is animal tracking in the livestock industry. ...

... "Somark announces the successful testing of Biocompatible Chipless RFID Ink in cattle and laboratory rats. The test proved the efficacy of injecting and reading a Biocompatible Chipless RFID Ink tattoo within the skin of animals. The technology will be initially leveraged to the livestock industry to help identify / track cattle and thus mitigate export trade loss from BSE (a.k.a. Mad Cow Disease) scares. Secondary target markets include laboratory animals, dogs & cats, prime cuts of meat, and military personnel. The company, which is currently raising a Series A equity financing, will license the technology to secondary target markets." ...

Via Somark Innovations: Somark Innovations Announces Successful Live Animal Tests of Biocompatible Chipless RFID Ink in Cattle and Laboratory Rats

RFID Warehouse Forklift System

Intermec introduces forklift RFID system that integrates automated data collection to drive efficiency in warehouse business processes. ...

... "This ground-breaking RFID (radio frequency identification) forklift installation system allows forklift drivers to use RFID and other data collection technologies to gather complete real-time inventory data efficiently and safely without leaving their vehicle. Intermec partnered with Cascade Corporation, the world leader in the design and manufacture of lift truck attachments, to create an RFID-enabled forklift system that integrates durable, rugged inventory and data collection technology with existing forklift equipment. The system improves performance and safety while significantly reducing the cost of RFID forklift deployments in warehouse applications. The Intermec Adaptable Load Backrest and Antenna Cell system can be made to accommodate almost all forklifts on the market, providing customers a factory-certified product designed specifically for their lift trucks that meets OSHA and industry safety requirements. Flexible and configurable, the Adaptable Load Backrest switches easily from one application to another, allowing the driver to accomplish pallet-, case- and even shelf-level readings without the costly and intensive labor associated with retrofit systems. " ...

Via Intermec: Intermec and Cascade Introduce Mobile RFID Forklift Adaptable Load Backrest for Rugged, Industrial Warehouse Use

Hospital RFID Realizes Patient Benefits

HP and Precision Dynamics implement patient management system based on radio frequency identification (RFID) technology in Taiwan at the Chang-Gung Memorial Hospital (CGMH). The hospital CIO sees the hospital realizing benefits through a reduction in medical errors, from root causes such as manual processes, compliance to standard operating procedures, and visibility to real-time patient status and medical process exceptions. The system is architected with PDC's RFID wristbands and HP's mobile and fixed RFID infrastructure. Privacy is managed by storing confidential patient information on the RFID chip rather than printing the information on the wristband. ...

... "CGMH implemented the RFID system in its operating rooms to improve patient safety by verifying and positively identifying patients, gathering real-time data, reducing risk of wrong-site and/or wrong-patient surgery, and ensuring compliance with hospital patient safety procedures or standard operating procedures. Since the implementation, CGMH has achieved 100% accuracy in patient ID in the OR. The new RFID system automates many manual functions of the previous operating room processes. The system helps verify that the five rights of medication safety are met - right patient, medication, dose, time, and route - as well as right surgery and surgical site. Automating patient data verification processes has saved CGMH medical staff an average of 4.3 minutes per patient. Also, automated data collection has helped prevent common manual data entry mistakes, which if gone undetected could lead to medical errors." ...

Via HP: Precision Dynamics Corporation and HP Provide Chang Gung Memorial Hospital with RFID System for Patient Management

Healthcare RFID MayoClinic

3M and Mayo Clinic demonstrate pilot installation of a radio frequency identification (RFID) system in Mayo Clinic's endoscopy surgical suites for management of the collection and tracking of patient tissue samples. 3M RFID system was configured to enable Mayo Clinic's business processes for specimen management. ...

... "Utilizing 3M Track and Trace Technology, this RFID system enhances Mayo Clinic's ability to manage specimen and tissue samples from the collection stage to the pathology laboratory. Collecting and analyzing patient tissue is a crucial medical procedure. Mayo Clinic continues to take a leadership role in health care's effort focused on patient safety and care. Multiple 3M technologies were brought forward during the five-month pilot project at Mayo Clinic. Results demonstrated quantifiable operational efficiencies in the specimen-management process, accurate communication of data, and verification of information. Expansion of the Track and Trace system within the endoscopy practice will take place in planned, controlled phases. 3M and Mayo Clinic expect this rollout to be completed in early 2007. " ...

Via 3M: Two Minnesota Institutions Advance RFID Technologies in Health Care

RFID Metal Packaging Works as Antenna

QinetiQ and Crown collaborate to develop adaptation of QinetiQ's Omni-ID Radio Frequency Identification (RFID) technology for use on metal packaging. The improvements will enable RFID tags at the unit-level on metal items. Technology advancement is expected to integrate the metal substrate as part of the RFID tag's antenna. ...

... "This will enable brand owners to integrate ultra high frequency (UHF) RFID tags into metal packaging for a wide variety of applications at the single item level. Designed to mitigate issues such as signal reflection, detuning and grounding which reduce or negate RFID's effectiveness on metal packaging or with aqueous-based products, the unique technology leverages several of metal's inherent properties and shifts the format into an advantageous position.

QinetiQ's standalone Omni-ID tags and integrated Omni-ID packaging technology allows a UHF tag to be mounted directly onto the metal substrate. Measuring substantially less than 1mm in thickness, the unique Omni-ID structure collects and focuses RF energy and enables highly efficient coupling to the chip. Another advantage of the system is that RFID chips require only a short coupling antenna rather than the large dipole usually incorporated in UHF tags, significantly reducing manufacturing costs. Crown and QinetiQ are continuing development of the technology for metal packaging to further optimize design. In the near future, it is expected that the metal substrate itself will have an integral role in the way the technology functions. Using a beverage or food can as an example, the can itself would serve as the antenna, simplifying production of the RFID tag and further reducing costs. " ...

Via Qinetiq: Crown teams up with QinetiQ to resolve challenges of RFID on metal packaging ...

RFID Optimize Accuracy: ODIN Patent Award

ODIN tech receives U.S. patent for software and hardware that enables the accuracy of RFID technology to be optimized. The patent covers the technology design centered on its RFID reader software. ...

... "ODIN technologies, the leader in the physics of RFID for solution design, deployment, and optimization software, announces the award of a broad patent relating to the use of software and equipment to improve RFID performance accuracy and visibility. Patent number 7,132,948 was granted on November 7, 2006 and covers a system and method for optimally placing RFID tag and reader antennas. The intellectual property behind the patents is one design component that forms the foundation of ODIN's EasyReader software. ODIN technologies' patent portfolio is centered on intellectual property, innovative software, algorithms, and methodologies which automate the RFID system life-cycle from installation and design to trouble-shooting and maintenance. ODIN technologies' pioneering physicists and RF engineers began developing solutions to challenging RFID performance problems many years ago and have worked with scores of clients to prove out those strategies. Based on RF physics, ODIN's portfolio of solutions and methodologies provide rapid insight into why certain approaches will be successful and why other approaches fail. This saves end users time and cost, helps avoid predictable pitfalls and improves system performance. " ...

Via ODIN technologies: ODIN technologies Awarded U.S. Patent for RFID Accuracy Optimization ...

OTI RFID Supports Discover Network Contactless Payment

OTI receives certification for its RFID reader in support of the contactless payment solution for the Discover Network. ...

... "Discover Network, a business unit of Discover Financial Services and Morgan Stanley, announced that it has certified the Saturn 5000 contactless reader developed by On Track Innovations (OTI) (NASDAQ: OTIV), a global leader in contactless microprocessor-based smart card solutions, for use with Discover Network's contactless payment application. The certification process ensures that the Saturn 5000's reader technology is able to support Discover Network's proprietary contactless payment solution. Additional OTI readers are in the certification process.

Compatible with major POS terminal providers and acquirers, Saturn 5000's enhanced features allow the reader to support multiple application programs and read a variety of payments sources, including credit cards and key fobs and cell phones. The console's plug-and-play design and small footprint facilitates quick upgrades of existing POS terminals to accept contactless payments. And because the reader faces the customer, the Saturn 5000 enables easier and faster payment transactions. Additionally, OTI's patented matched antenna technology provides more effective power consumption, reliable and stable communications, and additional levels of security and encryption throughout the communication link. " ...

Via Discover Network: Discover Network Certifies Oti Card Reader For Contactless Payment System, OTI's Saturn 5000 to Support Discover Network's Fast, Secure, and Simple Contactless Payment System Worldwide

RFID Wristband: Hotel Guest Convenience

Precision Dynamics Corporation implements Smart Band® RFID(radio frequency identification) wristbands and PDC Smart Kiosk RFID Cashless Point-of-Sale (POS) System at the new Great Wolf Lodge at Paramount's Kings Island in Mason, Ohio. ...

... "The 401-suite northwoods-themed family resort with an indoor waterpark, implemented PDC's RFID Wristband System to provide guests with enhanced services including hotel room keyless entry, cashless payment options, automated arcade token dispensers, and more. At registration, guests are given a Smart Band, which is embedded with a 13.56MHz RFID inlay. The automated wristbands allow for keyless entry into hotel rooms for all family members, eliminating the need to carry hotel room keys. MICROS' POS workstations enable guests to make cashless payments with the RFID wristbands throughout the resort. Also, the RFID wristbands eliminate the chances of money getting wet or lost while at the water park. Guests are given the choice of using the RFID wristbands to make charges directly to their rooms or to set up a pre-funded account for purchases. The pre-funded account is a great way to allow children to purchase products and services without giving them full charging privileges. Both types of accounts can be increased or funded by using Smart Kiosks throughout the resort or at the registration desk. All information on the wristband is encrypted providing maximum security for guests. " ...

Precision Dynamics Corporation: Great Wolf Lodge in Ohio Installs RFID Wristband System to Provide Added Guest Convenience and Service ...

RFID Improves Stroke Treatment: Access Health Records

National Stroke Association endorses implantable RFID microchips as a treatment to enable access to the critical health records of stroke victims. A stroke occurs when a blood clot blocks an artery or a blood vessel breaks, interrupting blood flow to an area of the brain. National Stroke Association is the leading national non-profit organization devoting all of its efforts and resources to stroke. VeriMed Patient Identification System is used to rapidly and accurately identify people who arrive in an emergency room and are unable to communicate. This RFID identification system uses the first human-implantable passive microchip, the implantable VeriChip. ...

... "The National Stroke Association (NSA) has recognized that implantable RFID microchip technology offers the ability to improve stroke treatment by providing medical professionals with immediate access to vital health information of stroke-afflicted patients. An excerpt from the letter, signed by James Baranski, CEO of the National Stroke Association, states: Personal Health Records, including implantable RFID microchips such as VeriMed, could play a critical role in assisting medical professionals in delivering appropriate stroke treatment promptly, leading to better patient outcomes. The VeriMed Patient Identification System which consists of a handheld radio frequency identification (RFID) scanner, an implantable RFID microchip and a secure patient database, is being used to help rapidly identify and provide access to important health information on participating patients who arrive at an emergency department unconscious, delirious or unable to communicate. This implantable RFID system is the only system of its type cleared by the United States Food and Drug Administration for use in people. " ...

Via VeriChip: National Stroke Association Views Implantable RFID Microchip such as VeriMed as a Potential Life-Saving Medical Device ...

RFID Context Aware Location Services

Sybase enhances its RFID Anywhere solution to support advanced services that enable context-aware locating capabilities. Location information is given a business context in applications that support asset management, access control, resource management in industries, such as logistics, healthcare, and other supply chain environments. Location information will integrate sensor technology data associated with assets. Assets will be identified and associated with fixed locations and temporal information to provide location and timing insights. Conditions can be monitored and alerts will be provided based on events. ...

... "RFID Anywhere 3.0 breaks new ground with the delivery of a context-aware Location Information System. Using RFID Anywhere, businesses can not only track assets from a range of data collection points [such as passive RFID, active RFID, real-time location systems (RTLS), barcode, global positioning systems (GPS) and environmental sensors], but can dramatically enhance the value of this data by associating environmental inputs (e.g., temperature) along with the location data. In addition, the RFID Anywhere 3.0 Location Information System exposes its complete feature set via a rich service oriented architecture (SOA) web services layer allowing organizations to easily transform static business information into business-aware intelligence. " ...

Via Sybase: Sybase iAnywhere Pioneers Context-Aware Location Information System with RFID Anywhere 3.0 ...

RFID Anywhere simplifies the development, deployment, configuration and management tasks for highly distributed, multi-site, intelligent sensor networks, and abstracts the interaction with the physical network of devices. With support for over forty devices, this powerful infrastructure enables the creation of intelligent sensor networks out-of-the-box. By using RFID Anywhere, sensors are able to work together as an intelligent network by combining, organizing and coordinating these technologies through a common management structure, advanced feature set and event-driven development framework.

RFID Supports Nissan Continuous Improvement Initiative

Nissan implements a continuous improvement initiative to target vehicle labor cost reduction, increase logistics throughput accelerating customer service, and enhance vehicle quality through defect elimination early in the product lifecycle. The initiative will be enabled by a wireless architecture and active RFID technology in the Nissan Canton MS manufacturing facility, supplied by WhereNet. ...

... "As part of a continuous improvement initiative at its four-million square foot assembly plant in Canton, Mississippi, Nissan will leverage a single wireless architecture to run multiple WhereNet applications, including the WhereSoft Yard Management System (YMS) and Vehicle Tracking and Management System (VTMS), to improve production velocity and throughput, labor productivity, and vehicle quality. Nissan's Canton assembly plant has the capacity to produce 400,000 vehicles per year, including the Altima sedan, Armada full-size sport utility vehicle, Infiniti QX56 full-size sport utility vehicle, Quest minivan, and Titan full-size pickup truck.

Deploying the WhereNet single wireless infrastructure over the entire Canton complex will take less than 90 days. The hardware consists of 1500 active RFID WhereTag transmitters, which are temporarily attached to new vehicles as they roll off the assembly line as part of the WhereNet VTMS system; 700 WhereTag transmitters that are permanently fixed to trailers belonging to Nissan's dedicated suppliers or temporarily attached to others as part of the WhereSoft YMS application; 120 WherePort magnetic exciters positioned between gates and at key choke points across the complex; and a local infrastructure of 80 wireless WhereLAN locating access points.

Nissan also plans to deploy the WhereNet automated gate check-in/out solution known as Fast Gate that supports 24x7 sequenced parts deliveries from Nissan suppliers. Fast Gate senses when a truck is approaching the gate; cross-references detailed information about the truck in a database; and, if authorized, automatically opens the gate to grant entry. Then, based on business rules loaded into the WhereSoft yard management application, the system instructs drivers and yard personnel to deliver the inbound load to the appropriate dock door for just-in-time sequencing of parts based on the assembly line build plan for that work shift.



When new vehicles roll off the Nissan assembly line, each vehicle is assigned an active RFID WhereTag transmitter that is married to the vehicle identification number (VIN). The WhereTag remains on the vehicle until it has been processed and is ready to ship to its final destination. Nissan uses the WhereNet VTMS in off-line areas to manage post-assembly verification and test processes, as well as quality repair, containment and shipping zones. The system includes a logical hierarchy of rules that manages the processing of every vehicle in accordance with its assigned status so that critical orders are processed before lower-priority units. " ...

Via Wherenet: NISSAN SELECTS WHERENET'S LOCATABLE, ACTIVE RFID SYSTEM TO AUTOMATE INBOUND SUPPLY CHAIN AND OUTBOUND DELIVERY CHAIN ...

HighSpeed RFID Read Rates: Pharma Cases

Impinj discusses results of live demonstration of RFID technology in pharmaceutical packaging application with Owens-Illinois (O-I) at the RFID Health Care Industry Adoption Summit in D.C. ...

... "In pharmaceutical manufacturing and fill-line demonstrations, a near-field UHF Gen 2 RFID solution, comprising Impinj's Speedway reader and O-I's item-level embedded RFID tags powered by Impinj's Monza chips, achieved 100% reliability when reading and writing tags at high speed on pharmaceutical bottles. In the first demonstration, the UHF Gen 2 system programmed 96-bit EPC numbers at rates exceeding 600 tags per minute on bottles containing the four most common dose types - liquids, gel caps, solids and powder. In the second demonstration, the system developed by Impinj and O-I flawlessly read 600 tags per minute on cases containing 48 individually tagged bottles and a case-level tag. " ...

Via Impinj: Impinj-Powered UHF Gen 2 RFID Solution Delivers Exceptional Results for Item Tagging of Pharmaceuticals

RFID Pharma Supply Chain: Track and Trace EPCIS Pilot

AmerisourceBergen announces innovative Track and Trace Program that will benefit the pharmaceutical supply channel. Its pilot program connects AmerisourceBergen's EPCIS directly to other business partner EPCIS systems and to specific pharmaceutical manufacturer systems. In Q1-2007, VeriSign will provide authentication services and enable visibility across multiple EPCIS systems. ...

... "AmerisourceBergen has been a leader in protecting the integrity of the pharmaceutical supply channel, first by pledging over one year ago to purchase 100 percent of its pharmaceutical and other products directly from the product manufacturer, and now by launching a unique Track and Trace initiative which will utilize RFID and Electronic Product Code Information System (EPCIS) technology to track and trace products throughout the entire distribution process. AmerisourceBergen plans to formally launch the Track and Trace pilot program at its largest distribution center in California by the end of 2006. In the pilot, AmerisourceBergen will use IBM's RFID middleware and embedded software on readers to read RFID tags currently used by certain pharmaceutical manufacturers as those products enter the distribution center. The unique product ID from each RFID tag will be electronically stored in IBM's EPCIS, which will be the platform for secure electronic communications back to the product's manufacturer. This secure information exchange will allow AmerisourceBergen and its trading partners to work collaboratively to share transaction information and further secure the supply channel. As new orders come into the AmerisourceBergen distribution center, the RFID system can monitor product placed in shipping totes as they move through the picking, packing, and shipping processes. As each tote leaves the distribution center the EPCIS software will record the time and location of each unit leaving the premises as well as its intended destination so that AmerisourceBergen has a complete record of the history of all RFID tagged drugs. " ...

Via AmerisourceBergen: AmerisourceBergen Announces Innovative Track and Trace Program for the Pharmaceutical Supply Channel

RFID Implementation: ROI More Predictable

Research report looks at the increased predictability of RFID implementations and the overall return-on-investment, or ROI. ...

... "the once hidden costs associated with sometimes dramatic organizational changes brought about by (or necessary to) a successful RFID implementation can now be anticipated and managed. As a result, enterprises are enjoying shorter design and pilot phases, scalable solutions, smoother rollout, and less challenging integration tasks. " ...

Via Aberdeen Group: Link

Upcoming Conference will focus on the return on RFID investments ...

5th Annual Global RFID ROI Summit London - The RFID Conference (Radio Frequency Identification) for industry experts: "The Global RFID-ROI Summit 2007, 29 & 30 January 2007, ExCeL Conference Centre - London: the event focuses on achieving real business value from successful RFID implementation. "

RFID implementation must be integrated into business processes in order to realize the full benefits ...

Via Sun Micro: RFID ROI Requires More Than Slap and Ship Deployment: "To really realize ROI from RFID, companies need to see this technology as a way to collect valuable business intelligence that can help them cut costs and increase profits, says Manish Bhuptani, director of market development at Sun Microsystems. "

Companies that drive business change increase the ROI from RFID implementations ...

Via Teradata: The Analytic Value of RFID (PDF): "Companies that take a more functional approach to RFID implementations will often be disappointed, but those companies that see and leverage RFID adoption as an opportunity to drive system-level changes will unlock the ROI in RFID. "

Adoption of RFID technology will ultimately deliver the full benefits of the RFID project. Leading indicators of RFID adoption should be monitored. ...

Deloitte & Touche LLP on RFID: "The high costs of RFID deployment make it hard to see an immediate return on investment. Businesses should not rush in without first knowing the best RFID adoption strategy and how they intend to measure its performance. "

RFID Pharma Fraud: Aegate RealTime Communication System

Item level drug traceability is enabled through RFID technology. Aegate solution automates tracking, authentication, and information visibility. ...

... "Aegate provides drug manufacturers, pharmacists and their patients with a real time communication system that operates at individual item level. Each pack of medicine is given a unique machine-readable identification number, known as unique serialisation. Using one of a number of technologies, including RFID, 1D or 2D barcodes, items are scanned as they are dispensed. The system allows the pharmacist to check expiry dates and recall information, and provide updated patient care advice. This ensures pharmacists receive product safety information more rapidly. Currently, communications are achieved by fax or post and can reach pharmacies after drugs have been dispensed. The system also allows the authentication of the origins of medicines, thereby protecting against stolen and fake drugs. Patient safety is an increasingly important issue and counterfeit drug sales are forecast to reach $75billion globally by 2010 if action is not taken. Aegate provides drug manufacturers, pharmacists and their patients with a real time communication system that operates at individual item level. Each pack of medicine is given a unique machine-readable identification number, known as unique serialisation. Using one of a number of technologies, including RFID, 1D or 2D barcodes, items are scanned as they are dispensed. The system allows the pharmacist to check expiry dates and recall information, and provide updated patient care advice. This ensures pharmacists receive product safety information more rapidly. Currently, communications are achieved by fax or post and can reach pharmacies after drugs have been dispensed. The system also allows the authentication of the origins of medicines, thereby protecting against stolen " ...

Via Qinetiq: QinetiQ awarded GBP 1.6m Aegate secure hosting contract ...

RFID Smart Dust Research: Miniaturization

UC Berkeley focuses its RFID research to miniaturize circuits to create smart dust particles, that can serve a variety of applications. ...

... "The science/engineering goal of the Smart Dust project is to demonstrate that a complete sensor/communication system can be integrated into a cubic millimeter package. " ...

Via UC Berkeley: SMART DUST

WalMart RFID Compliance: Shaw Implements ODIN Tech ...

Shaw will implement ODIN's RFID technology solutions to comply with Walmart's RFID requirements. ODIN technologies is a leader in the physics of RFID solution design, deployment, and installation optimization software. ...

... "Shaw Industries Group, Inc., the world's largest supplier of carpets and rugs, selected ODIN technologies, the leader in the physics of RFID deployments, testing, and optimization software to design, and install an RFID system for supply chain optimization and to also comply with WalMart's mandate. Shaw is part of the Berkshire Hathaway portfolio and plans on leveraging RFID technology to solve multiple business issues. ODIN will be designing and deploying two RFID systems which will provide Shaw with supply chain visibility, efficiency and WalMart compliance. The initial deployment will take place in 3 facilities. " ...

Via ODIN Tech: Shaw Industries Selects ODIN for RFID Supply Chain and Compliance Pilots ...

RFID Track Trace System ...

Infosys has successfully implemented SAP RFID solution to enable CHEP's Global Track and Trace System. CHEP will use this system to provide real-time visibility to its customers for their products and to track the shipping assets. CHEP is the global leader in pallet and container pooling services and serves many of the world's largest companies. The company has more than 7,700 employees and operates in 44 countries. CHEP manages over 280 million pallets and containers through a global network of service centers. It identified product and asset visibility as a significant opportunity to leverage RFID technology. The Global Track and Trace System at CHEP enables vendor managed inventory (VMI), yields increased asset control, and optimizes inventory management. ...

... "This project is a significant step forward for global RFID adoption, combining SAP's RFID platform and applications with Infosys' strong thought leadership and robust implementation model for the RFID-enabled enterprise. By delivering innovative, value-added solutions with a low total cost of ownership (TCO), Infosys and SAP aim to help organizations adopt RFID technology to both enhance their existing business models and pursue new ones. " ...

Via Infosys: Infosys Deploys SAP Solutions for RFID for CHEP's Global Track and Trace System

RFID Out-of-Box Solution: SMB Market

Intermec partners to create an out-of-box RFID compliance experience for suppliers to the retail industry and the Department of Defense. This is especially critical for small and medium sized businesses (SMB market) as this RFID kit enabled them to accelerate their RFID compliance efforts. The kits include everything required to meet RFID compliance mandates, generate and apply Generation-2 RFID tags, and verify tag information. This is a time-saver as it enables an SMB customer to accelerate to the integration testing phase. ...

... "To generate a label, customer order information and the customer-stipulated label format is transmitted by the Intermec portable terminal to the PM4i printer's on-board encoder, which translates the information and prints it into an RFID-readable tag, barcode or human readable label. The printer's embedded reader then scans and verifies the tag's information before it is placed on a carton or pallet. The Intermec 751, operating with an attached IP4 portable reader, or the IF5 fixed RFID reader then re-verifies the order information and confirms shipment. The Informs kit comes with stand-alone PC-based compliance software that includes all standard retail and DOD-compliant label formats, so users have easy and immediate access to compliant label formats. The software can act as a stand-alone shipping application and interoperates with all ERP software for complete system integration. A key component of the system, EPC Solutions' Tag Manager software contains GTIN and SSCC smart labels information and allows users to immediately begin shipping cases and pallets with standards-compliant, up-to-date labeling. " ...

Via Intermec: Intermec and Informs Deliver Affordable, Streamlined RFID Compliance Kit

HP RFID: DataCenter Asset Tracking ...

Meijer, a large privately held retailer, tests HP RFID solution for the tracking of assets in the data center. HP is investing in RFID technology to help retailers and manufacturers optimize their supply chain costs while accelerating the speed to market. ...

... "HP announced its researchers have created a radio frequency identification (RFID) asset tracking technology for data centers and successfully tested it at a major retailer. The technology was developed by HP Labs, the company's central research facility, and tested at Meijer Inc., a retailer with more than 170 grocery and specialty stores in the midwestern United States. The solution could automatically monitor data center assets, providing real-time tracking and auditing of servers, networking equipment, server and storage enclosures and other technology using RFID.

The technology uses RFID readers and RFID tags to monitor the location of individual components within the data center, including the addition of new devices and device movement to other areas. The sensing infrastructure creates a high-resolution view of devices throughout the data center. The system also can provide historical data related to additions, changes and moves of servers and server-related equipment. " ...

Via HP: HP Creates RFID Technology for Tracking Data Center Assets:

RFID SmartCards AccessControl ...

ASSA ABLOY Identification Technologies supplies the Cartes conference with RFID-enabled smart card for access control. ...

... "ASSA ABLOY Identification Technologies (ITG) will provide 30,000 contactless smart cards to be used by exhibitors, visitors, VIP guests and the organizers themselves. The cards are manufactured by VisionCard, a leading European card manufacturer based in Austria and part of ITG. Among the special features of the card is the printed antenna, which represents a complementary technology to ITG's other core transponder technologies, wire-embedding, wire-transfer and coil winding. VisionCard's long track record and their expertise in high volume printing allow the company to produce high quality printed antennas very cost efficiently and to connect them to any 13.56 MHz IC module available in the market. The cards for the CARTES exhibition are based on Philips mifare 1k chips. Set up of the access control system at the exhibition has been entrusted to French system integrator Tech-Event. For this application, Tech-Event has chosen RFID reader modules manufactured by ACG Identification Technologies, another ASSA ABLOY ITG company. The reader modules provided by ACG, compatible with multiple ISO standards including ISO 14443A/B and ISO 15693, will be used to read all the entry badges issued for the exhibition. " ...

Via ASSA ABLOY Identification Technologies: CARTES exhibition goes contactless with RFID technology from ASSA ABLOY ITG ...

RFID Library System: Working Through The Issues ...

Implementation of RFID system at local library works through typical start-up issues: customer communications, data management, and interesting suprises, such as more accuracy inventory. ...

... "The RFID system uses stamp-sized electronic tags to track the location of library materials, permitting librarians to more effectively manage the collection and decrease thefts. " ...

Via LongmontFYI: City library struggles ...

RFID Battery-Assist Passive Tag: Supports Logistics and Manufacturing ...

Intelleflex RFID tags can be used by logistics companies and in manufacturing in long-range, battery-assisted mode for real-time inventory tracking of assemblies in the warehouses. The RFID system can automatically generate a proof of shipment when assemblies are shipped. When used in maintenance operations in passive mode, companies can realize significant benefits from having actionable manufacturing and repair history data in the 64Kb user memory of the RFID tag at the point of use. ...

... "Intelleflex's InfoSure tags and the I-Beam reader are multi-protocol, ensuring global interoperability using EPC standards. InfoSure tags can be used as passive C1G2 tags with any other C1G2 reader or used in the battery-assisted passive mode at long ranges with the I-Beam reader. InfoSure tags offer up to 100-meter read/write range in free space, which translates to 100 percent read/write reliability at standard working ranges in industrial environments. They also offer 64 kb user memory, which is segmented into 1 kb blocks so they can be independently protected for read/write access through passwords. The I-Beam reader can read any EPC C1G2 tag as well as the Class 3 InfoSure tag. Initial product shipments of both the tags and readers are targeted for asset management, yard management, manufacturing and zonal access control applications. " ...

Via Intelleflex Corporation: Intelleflex Announces Availability of its RFID Battery-Assisted Passive Tag and Reader Products ...

Optag RFID: Airport Security Passenger Flow

Optag RFID system will track passengers after the security checkpoint. ...

... "This system will deliver better knowledge of the movements of passengers in the air side of a terminal before they enter the aircraft. " ...

Via Optag Consortium: Optag Airport Efficiency, Security, and Passenger Flow

RFID Port Security: Container Shipping ...

Savi Networks will implement RFID container shipping to improve port security at Virginia ports. ...

... "Savi Networks announced that it is installing Radio Frequency Identification-based (RFID) technology information services at Virginia Port Authority terminals to further enhance the security and efficiency of cargo container shipments. Under an agreement signed August 22, with the VPA, Savi Networks will deploy a system compatible with international standards (ISO18000-7) at Norfolk International Terminal, Newport News Marine Terminal and Portsmouth Marine Terminal. The network automatically tracks the location and security status of RFID-tagged containers. SaviTrak, the company's web-based managed information service, also will be utilized to deliver real-time information collected by the network infrastructure. " ...

Via Savi Technology: SAVI NETWORKS TO DEPLOY CARGO SECURITY AND TRACKING NETWORK AT VIRGINIA PORT AUTHORITY TERMINALS ...

DOD RFID Dept of Defense Implementation Enablers

ODIN Technologies shares some of the key ingredients (Accuracy and Implementation Speed) to enabling their successful implementation of RFID technology in the DOD supply chain. The Dept of Defense has strict read rate accuracy requirements that ODIN had to meet with limited technology capabilities at that time. In addition, ODIN perfected an implementation methodology for the DOD that improved the speed of delivery while sustaining performance quality. ...

... "DoD is modernizing its logistics system to better support the warfighter. Passive RFID is at the center of that transformation. It is a core element of the DoD's force transformation initiative designed to create a more agile military. However, if the tags and readers do not communicate reliably, the benefits will not materialize. After years of planning, the DLA needed a highly accurate RFID network established rapidly.

...

Accuracy: DoD expected its RFID system to be an order of magnitude more sophisticated than what was currently being deployed. Boundaries relative to read-rates and performance were strict, unlike many retailers who have toyed with trial-and-error methods. Rather than just attempt to read a single pallet tag, the DoD demanded 20 Gen 1.0 and Gen 2.0 RFID tags be affixed to cases and read as they come through a dock door - 100% accurately. This required scientific precision when designing and configuring the RFID network. Each portal was tested 10 times for that performance criteria. The DoD has shown RFID will reduce costs, increase supply visibility and streamline its entire supply chain, from the factory-to-the-foxhole. However, it can only do this if the RFID system is accurate and reliable.

...

Implementation Methods and Speed: Eighteen facilities spanning the continental U.S. (CONUS) were evaluated, solutions designed, installed and tested to 100% accuracy in under 130 days. " ...

Via ODIN Technologies: DOD Case Study (PDF) ...

RFID Wireless Toll Payment

Transcore receives expanded order for RFID tags that enable the Jamaican wireless toll payment system. ...

... "Jamaica's Highway 2000 expands toll collection infrastructure with opening of Portmore gateway, completing the first phase of a three-tiered project. Jamaican Infrastructure Operator, which operates the roadway for the TransJamaican Highway Ltd., increases order for TransCore radio frequency identification (RFID) eGo tags. The paper-thin windshield sticker tag, which operates at 902-928 MHz frequency band, expands global use providing an economical RFID tag technology that can increase patrons' migration to wireless payment of tolls and speed traffic throughput. " ...

Via Transcore: Jamaica Highway2000 Expands Toll Collection System, Increases RFID Sticker Tag Use Worldwide ...

Hospital RFID: High Value Asset Management ...

THE HEART HOSPITAL Baylor Plano will be dedicated solely to providing inpatient and outpatient cardiovascular care. The $100 million, 68-bed hospital is scheduled to open in January 2007 on the campus of Baylor Regional Medical Center in Plano., Texas Hospital will automate the storage, tracking, utilization, and billing of clinical resources through RFID technology to realize benefits in enhanced care quality, increased productivity, accurate billing, and significant inventory cost savings. ...

... "To support the opening of the facility in January 2007, THE HEART HOSPITAL Baylor Plano will implement a radio frequency identification (RFID) enabled inventory management system to store, track, and manage the utilization of high cost cardiovascular devices and supplies. Developed by Mobile Aspects, Inc., of Pittsburgh, Pa., the system, called iRISupply, uses a RFID tracking architecture to automate charge capture, inventory management, device expiration management, and other key operational processes within the patient care setting. THE HEART HOSPITAL will implement fourteen iRISupply cabinet units to manage items such as stents, catheters, and guide wires that are commonly used during cardiovascular procedures. In leveraging the RFID technology, the organization seeks to efficiently and accurately automate device and supply utilization processes without manual tracking approaches such as paper documentation, stickers, bar coding or button pushing. " ...

Via Mobile Aspects: THE HEART HOSPITAL Baylor Plano selects RFID system from Mobile Aspects ...

RFID Army Depot MRO Maintenance Repair Overhaul ...

Tobyhanna Depot implements WhereNet's active RFID technology to manage MRO of command and control systems for the military. ...

... "WhereNet Corp. announced that Tobyhanna Army Depot has expanded use of the standards-based WhereNet active RFID, real-time locating system (RTLS) technology to streamline the repair and overhaul of defense electronic systems at the Pennsylvania facility. Tobyhanna Army Depot performs the maintenance, repair, and overhaul of command, control, communications, intelligence, surveillance, and reconnaissance systems for the Defense Department. Tobyhanna initially contracted with SYS-TEC to deploy the WhereNet system in late 2004 to optimize the refurbishment of the AN/TRC-170 Microwave Communications System and AN/TPS-75 Air Defense Radar System. After extended deployment in rugged environments while supporting America's armed forces, these communications systems are shipped to Tobyhanna, where each system is disassembled, overhauled, and tested before being shipped out to the field again. With assemblies, subassemblies, components, and spare parts spread across the more than 1.9-million-square-foot refurbishment areas, WhereNet's RTLS technology provides each work center with visibility of the AN/TRC-170 and AN/TPS-75 system's work in process. " ...

Via Wherenet: TOBYHANNA ARMY DEPOT EXPANDS USE OF WHERENET ACTIVE RFID REAL-TIME LOCATING SYSTEM TECHNOLOGY ...

RFID InkJet Printable Tags

FujiFilm Dimatix work to advance its capabilities in printable RFID tags using ink-jet printers. It has demonstrated capabilities in various sizes and materials on multiple substrates. ...

... "FUJIFILM Dimatix, Inc., a leading provider of commercial and industrial ink jet products, announced that it has repeatedly used its revolutionary ink jet technology to print silver fluid with features of less than 20 microns. With the proven capability to precision print 1 picoliter-sized drops of organic and inorganic materials on a large variety of substrates, the company is continuing to pave the way for an entirely new way of developing and manufacturing electronic books, printed polymer backplanes, printed sensors, complete RFID tags and other flexible electronics.

The Dimatix Materials Printer (DMP) is the world's first complete, low-cost system for high-precision jetting of all kinds of functional fluids on any type of surface, including plastic, glass, metal sheets, silicon, membranes, gels, thin films and paper. By directly printing on their own substrates, customers can rapidly develop prototypes and keep process technology in-house. The printer's small size and low price make it convenient, easy to use and cost-effective to own. Featuring single-use cartridges that customers can fill with their own fluid materials, the system minimizes waste of expensive materials. " ...

Via Dimatix: FUJIFILM Dimatix Enables Direct Printing of Silver Fluid with Features of Less than 20 Microns ...

FUJIFILM Dimatix Materials Deposition Division is evolving ink jetting technology into a production process that lowers the cost, time and environmental impact of producing electronic circuits and functions for RFID tags, flat panel displays, circuit boards and other electronic and bioscience applications.

RFID Middleware: Automate Integrate ...

Reltronics Technologies has made their system, SmartInstrument, a versatile middleware for automatic Radio Frequency Identification (RFID) systems, widely available in the marketplace. Reltronics strengths lie in automation and identification using remote RFID technology. The SmartInstrument middleware system plays a role in supporting interoperability and integration of multiple, potentially incompatible, solutions. ...

... "One of Reltronics Technologies' fortes is in creating and supporting RFID systems that assist in automating asset and inventory management, identifying drug pedigrees, etc. and which rely upon storage and remote retrieval of data using RFID hardware (Readers, Antennas, Tags or Transponders). Retailers such as Wal-Mart and Target have whole-heartedly accepted the RFID concepts to implement efficiencies in their workflow and to limit inventories in their warehouses and they have subsequently initiated mandates to their vendors to implement RFID technology in their supplies within set timelines. These mandates are allowing shorter timelines and the industry not only needs many new deployments but also sustain existing deployments. SmartInstrument is a step forward to facilitate transparency in the RFID systems deployment thereby bringing commonality between various RFID protocols and hardware technologies (reader, antenna, and transponders or RFID tags), irrespective of the technology being new or old.

For instance, SmartInstrument enables end-users to deploy new RFID systems while seamlessly supporting all existing RFID systems and eliminating the need for single- sourcing thereby achieving a better return of investment. It fills the need by interpreting any RFID system utilizing any reader (Active, Passive), working on any frequency (LF, HF, VHF, UHF), with any communication protocol (Ethernet, WiFi, RS-232, RS-485), any transponder (Active, Passive), and any standard (EPCGlobal, ISO, AIMGlobal) bringing the much needed commonality into the RFID infrastructure. Reltronics Technologies' focus on bringing interoperability and sustainability into the RFID technology environment is the result of industry satisfaction with the RFID initiative, to enable overcoming the customer perception of which RFID technology to deploy, to enable commonality between the various RFID protocols, to enable a more cost-effective RFID system deployment, and finally to allow the end-users to start small with one RFID system and expand at their own financial pace without having to worry about the RFID system being antiquated. " ...

Via Reltronics: A Novel Idea to Harmonize Automatic Radio Frequency Identification (RFID) Systems ...

RFID Cargo Terminal Operational: Chain of Custody ...

Savi implements RFID-enabled chain of custody process at the Port of Felixstowe (PFL) in the UK. The system, called SaviTrak, automates the tracking of cargo as it is processed through the supply chain, while monitoring security. ...

... "Network infrastructure, including SaviTrak software and Radio Frequency Identification (RFID) readers, are now installed and operational at PFL's Trinity Terminal, the largest cargo-handling facility in the United Kingdom. The readers, which are placed on dockside cranes and at entry and exit gates, automatically capture chain of custody handoff points for containers equipped with international standards-based RFID tags. The real-time data is routed to the web-based network software, which transforms it into actionable information that enables SaviTrak customers to make better supply chain decisions. The SaviTrak information service is offered via an open technology platform, which accommodates multiple and interoperable Automatic Identification and Data Collection (AIDC) technologies, such as barcodes, EPC-compliant passive and active RFID technologies, and Global Positioning Systems (GPS) used to track ships and trucks that transport ocean containers. Active RFID technologies used are compatible with the ISO 18000-7 standard, and sensor seals are compatible with the ISO 18185 draft standard. " ...

Via Savi Technology: SAVI NETWORKS EXTENDS SAVITRAK REAL-TIME INFORMATION NETWORK TO UNITED KINGDOM'S PORT OF FELIXSTOWE ...

RFID CCTV Airport Security Speeds Flow ...

Optag is an RFID system integrated with closed-circuit CCTV television that enables passenger monitoring and security, while speeding the flow of passenger traffic. ...

... "This project will deploy networks of enhanced Closed Circuit Television (CCTV) systems coupled to local, direction based, and passenger tracking system using a far-field Radio Frequency Identification (RFID) tags. The system will facilitate real-time location of individual passenger within the airport, the analysis of both mass traffic & individual behaviours, and, where appropriate, the semi-automatic control of CCTV based vision systems to observe and record suspicious or unauthorised activity. " ...

Via AeroScratch: RFID Projects ...