RFID Library Book Management

RFID enables automation in library book management processes so that librarians can spend more face-time with customers. ...

... "The sorter contains RFID (radio-frequency identification) technology that reads the computer chip tags on each returned item that drops into a bin, which can hold a maximum of 125 items. " ...

Via Prescott Daily Courier: RFID speeds sorting at local library

RFID Asset Tracking System by 3M

3M brings RFID asset tracking solution to market. ...

... "Composed of 3M software, RFID or barcode tags and their corresponding readers, the Asset and Inventory Tracking System allows businesses to streamline their operations by efficiently monitoring and managing assets and inventory. The system can be used in a variety of ways to track assets and manage critical inventory. Its compatibility with both RFID and barcode tags allows companies greater flexibility in selecting a system to meet their needs. Either 3M or third-party hardware and tags can be used by the software ... " ...

Via 3M: Visibility of assets and critical inventory

RFID Memorial Tag

RFID is offered on a Memorial Tablet via TreeHugger:

... "RosettaStone is one of the company's first consumer RFID offerings, and Objecs predicts the data-rich granite tablets will appreciate in value and last at least as long as a tombstone. " ...

http://bit.ly/ajZ7OJ

RFID Reader Firmware Improves Stray Tag Elimination

Sirit updates its INfinity 510 firmware to release 3.0 and introduces improvements, such as enhancing the reading of tags at dock doors or portals with stray tag elimination. ...

... "The 3.0 firmware introduces Stray Tag Elimination technology (STE). This powerful addition allows customers to differentiate between tags that are actively transitioning the RF field and tags that are in the field but not moving. STE is particularly important around portals, such as a dock door, or for electronic article surveillance. The reader is able to distinguish between those tags moving through a portal or an exit separately from stationary tags in the vicinity of the portal. " ...

Via SIRIT: INfinity 510 RFID Reader

USB RFID Desktop Reader

DTRONIC has created a new UHF RFID Desktop Reader with USB connection in its EVO family of products, that will enable RFID tag reading and writing. ...

... "The UHF USB Desktop Reader of the modern EVO series offers the same features like iDTRONIC’s EVO USB Stick UHF. The Desktop Reader supports ISO18000-6 B/C tags incl. Class1 Gen2. Thanks to its wide frequency band from 840—960MHz, the iDTRONIC USB Desktop Reader EVO – UHF Multitag can be used in for all international standards (usable in Europe, US and Japan). The well-designed EVO desktop Reader allows an easy integration into most common RFID applications. A multi-Color LED allows intuitive interaction of the Application with the reader/writer. Its USB 2.0 interface offers high speed data transfer. " ...

Via iDTRONIC: UHF USB Desktop RFID Reader

Dairy Queen RFID Trial Tracks Customers

Dairy Queen deploys RFID tags in a pilot program to understand customer loyalty and preferences. Customers tag an item in their possession and swipe it upon return visits. ...

... "The consumer attaches the tiny tag to something they always have with them - a cellphone is suggested but hardly required - and can use it when they happen to be near a Dairy Queen. " ...

Via CBS News: Dairy Queen Loyalty Program RFID Pilot

Airport RFID Services Baggage Handling Process

Hong Kong International Airport will implement Avery's RFID tag in its baggage tracking process, with the goal of improving the customer experience. ...

... "Unlike bar code-only tags, which require the scanner to be in the line-of-sight to read the tag, the AD-833 RFID tag, specifically designed around aviation needs, can be read at long distances without line-of-sight in any orientation. RFID systems are also more reliable, achieving average read-rates of more than 97 percent, much better than a barcode-only system’s average of 80 percent. As a result, RFID tags allow more accurate tracking of baggage through HKIA’s baggage system. By empowering timely and accurate checked bag deliveries to the planes, airlines and passengers experience more on-time departures. In addition, the system reduces misdirected bags resulting in improved customer service. " ...

Via Avery Dennison: Hong Kong International Airport

Rugged RFID Chip Packaging

Impinj introduces packaged Monza 3 chips, which are durable and can operate in harsh environments through rugged RFID tags. The chips can endure frequent thermal cycling and physical stress. ...

... "Packaged Monza 3 chips perfectly suit the electronics industry, where manufacturers leverage RFID to monitor work-in-process, inventory, board revision history and counterfeiting as well as to improve recalls and customer service. The new Monza 3 offering is the smallest and lowest profile packaged chip in its class, and manufacturers can integrate the parts onto printed circuit boards (PCBs) using industry-standard surface mount technology (SMT). Monza 3’s extremely small package size enables placement on even the most space-constrained PCBs. " ...

Via Impinj: Packaged Monza 3 Tag Chips

Xterprise Financial RFID Asset Tracking

Xterprise expands its collaboration with the Financial Services Technology Consortium, FSTC, which develops emerging technologies to address challenges facing the financial services sector. ...

... "Xterprise and Microsoft have multiple customers who were among the founding members of the FSTC IT asset tagging standards work project and played leading roles in the push to refine and implement RFID tag standards for IT assets in the financial services industry. " ...

Via Xterprise: RFID innovation to Financial Services

RFID Tool Tracking for Ford Commercial Vehicles

DeWalt RFID-enabled Tool Link will support asset management on Ford vehicles for commercial use. This RFID asset tracking capability is integrated into an in-dash mobile computer that is internet-connected. ...

... "You fasten standard second-generation RFID tags to tools and other items and then scan the tags. With the vehicle running, a pair of RFID antennas inside the pickup bed or van cargo box scans for tagged items. The result is displayed on the In-Dash Computer screen. And you’re alerted if any inventoried items have not been loaded on the truck. " ...

Via Ford Work Solutions: Keep Track of Tools

RFID Location Beacon for RTLS Accuracy

Ekahau has created small mobile battery-powered transmitters, location beacons, to improve location accuracy where poor Wi-Fi coverage exists. ...

... "But in areas where there is marginal or poor wireless coverage, Ekahau location beacons can help improve location accuracy to levels previously available with expensive, proprietary systems not based on standard Wi-Fi technology. For a typical hospital environment, Ekahau location beacons can guarantee bed- and room-level accuracy in areas with poor Wi-Fi coverage, without the need to install additional Wi-Fi access points. Ekahau Wi-Fi tags recognize these location beacon signals and transmit the signal data to the RTLS server, which calculates the precise location of the Ekahau tags. The location beacons are typically mounted on a wall. Because they do not require any cabling, the location beacons can be moved around as needed to improve accuracy for a period of time or installed permanently in specific locations. " ...

Via Ekahau: Location Beacon

Frequent Flyer RFID Baggage Tags

RFID Drug Traceability Pilot

A pharma track and trace RFID system is successfully piloted in a live operating, global supply chain. ...

... "Data carriers, including GS1 bar codes (data matrix) and EPC/RFID tags, were used in the pilot to enable the full traceability of every single drug product in the supply chain on all levels of packaging and to monitor the progress of its transportation lorries. The implementation of a 4 string data set which included the product code, serial number, expiry date and batch number enabling mass serialisation of packaging items, together with the EPCIS system, delivered the necessary traceability information which was recorded in and out of each supply chain participants’ custody. All data stored in the EPCIS system provided real time visibility of the tracked products such as where the product is, which company has it now and how long have they got it for, as well as historical data. " ...

Via GS1 UK: First drug traceability pilot

RFID SNIF Tag

SNIF tags use RFID technology to enable monitoring of pet activity and social contacts. ...

... "When dogs wearing SNIF Tags come into close contact, the Tags record the encounters. Later, when logged in online, the owner can try to connect with other SNIF Tag dog owners ... " ...

Via WebVet: Monitor pet activity

RFID Vision

Look back at vision for RFID technology and see how far we have come. ...

... "Today systems based on radio-frequency identification (RFID) technology are helping to move Weiser's vision closer to reality. These systems consist of tags (small silicon chips that contain identifying data and sometimes other information) and of readers that automatically receive and decode that data. " ...

Via Scientific American: RFID is Key to Automating Everything

Wynn RFID in Las Vegas Chip Detection

The gaming industry has been adopting IT enablers, such as RFID technology, to improve its monitoring and detection capabilities. The industry is expanding at a heated pace in Asia, where technology adoption is increasing. ...

... "Wynn Las Vegas started the RFID chip approach rolling three years ago, putting radio frequency identification (RFID) tags into its casino chips. These tags allow readers, linked to the casino's computer systems, to detect counterfeit betting chips. " ...

Via MIS Asia: Gaming industry IT applications

Nokia RFID Retail Pilot

Textile RFID Tags

TAGSYS introduces RFID product line for textile applications. The product set offers RFID tags, readers and tunnels that are much faster and demonstrate high accuracy levels. ...

... "Encapsulated Tag Family – The ARIO 370L-HL and ARIO 370L-DL ISO 15693 tags are uniquely designed to withstand extreme humidity, temperature, pressure and chemical applications. Each tag is guaranteed to survive 200+ wash cycles ensuring durability and high performance beyond the life of the laundered item. By utilizing a technology that significantly improves performance in electrically noisy environments, the new tags perform up to 20% better than the previous generation of tags. " ...

Via TAGSYS: New RFID Systems for Textile Services

MicroWireless RFID Tracks Investory

Axcess International's Micro-Wireless Radio Frequency Identification (RFID) system will be implemented by the U.S. military to enable automatic inventory accounting and perimeter security for its ordnance assets. ...

... "Micro-Wireless technology allows for ultra-small, low cost wireless identification transmitters to be assigned to each asset, enabling automatic tracking, local area location determining and automatic security monitoring. The military initially selected Axcess' MicroWireless system for a pilot program because of its proven domain expertise in automatically identifying, tracking and protecting assets. During the thorough laboratory testing that began early last year, the military integrated the Axcess system into its core software system. The total system is now being implemented in the arms storage facility. Various forms of wireless tags are placed on the different types of armament. The items' electronic identifications are enrolled in the software to provide an automatic, real time inventory of each armament and its location based on its transmitted signal. Any unauthorized movement of an armament outside the storage area, automatically triggers an alert. The handling of armaments can be linked to authorized service personnel electronically via an RFID personnel badge so the authorized movement does not trigger an alarm. " ...

Via Axcess International: Micro-Wireless RFID System Implemented by U.S. Military for Ordnance Security

RFID Test Measurement

New test method enables rapid testing of multiple RFID tags, so that new antenna designs can be evaluated and commercialized. Research was conducted at Georgia Institute of Technology. ...

... "Each antenna signal can then be separated from the others, allowing his team to simultaneously measure the signals from multiple tags. Their experiments have shown they can measure the power strength and phase of up to 256 antennas in the field of view ... " ...

Via Science Daily: RFID Testbed Measures Multiple Tags

Georgia Tech Research Institute, RFID: "Dr. Joseph Dalton heads GTI's RFID program. "

RFID Ink Tattoo Identification

Ink-based RFID is being piloted on cows for identification, which will replace the physical RFID ear tags. ...

... "You've just made a new kind of tattoo identification, and it's being used on cows. " ...

Via kwmu: Tattoo Identification

RFID Tags Ski World Cup

UPM Raflatac supplies RFID inlays to enable attendee and vehicle access to the FIS female downhill ski World Cup on February 9 to 10. ...

... "At Piemonte Mondiale, all persons authorized by the event organizer will be provided with an RFID-enabled plastic ID card that carries their personal data and access rights. These cards will be used by all persons permitted to enter, from the press, athletes and invited VIPs to authorities and operators. The same goes for vehicle IDs: authorized vehicles will be issued an RFID-enabled pass. People and vehicles will be manually scanned with handheld RFID readers supplied by Brightpoint. " ...

Via UPM Raflatac: RFID tags in access control at female downhill ski World Cup

RFID Pharma Item and Case Tag Reading

Impinj pharma RFID solution supports packaging operations, while it reads the item-level and case RFID tags. ...

NASCAR RFID: Goodyear Tire Annual Contract for 2008 Season

Advanced ID will supply Goodyear Tire & Rubber embedded RFID tags in its racing tires for the 2008 NASCAR racing season, which includes the NEXTEL Cup, Busch Series and Craftsman Truck series races. ...

... "Providing the potential for extraordinary visibility of the benefits of Advanced ID's tire tags, NASCAR is the #1 spectator sport, holds 17 of the top 20 attended sporting events in the U.S., rates as the #2 rated regular-season sport on television with broadcasts in over 150 countries, and boasts 75 million fans. Advanced ID has worked with Goodyear for over two years to develop an RFID tag that meets the challenging requirements of NASCAR racing and the Goodyear Racing Eagle and Wrangler tires used throughout the 2006 and 2007 NASCAR seasons which have had embedded Advanced ID tire tags. " ...

Annual Contract from Goodyear Tire for NASCAR RFID Tire Tags for 2008 Season

Alien RFID Squiggle Tags

Alien Technology expands its portfolio of Alien Squiggle EPC Gen 2 RFID tags by introducing two new form factors for case and item-level tracking that are smaller and higher performance. ...

... "Alien Squiggle: The Squiggle (ALN-9540), the most versatile member of Alien's family, delivers industry leading range, reliability and price for a broad range of traditional pallet and case uses as well as innovative new RFID applications. The Squiggle tag outperforms other tags in leading benchmark studies, including the recent EECC UHF Tag Performance Survey. " ...

Via Alien Technology: Two Additions to Its Squiggle(R) Portfolio of EPC Gen 2 Tags

RFID Growth in Farm Supply Chain

New market research shows that the use of RFID systems and tags will increase to $5.8 billion spent in managing the food supply chain by 2017. ...

... "The allied sector of RFID on animals and in farming is similarly rising rapidly in dollars spent, an already robust figure of $462 million in 2007 rising to $2.6 billion in 2007. " ...

Via Research and Markets: RFID for Animals, Food and Farming

Bermuda RFID Electronic Vehicle Registration

Bermuda will use RFID technology on vehicles to manage the registration process. ...

... "Small radio frequency tags are attached to windshield stickers and placed on vehicles at the time of registration. Electronic readers are then used to remotely verify the registration status of the vehicle. EVR makes verifying motor vehicle registration easier and faster for law enforcement and, because it is less random, more equitable for Bermudians. The Government of Bermuda will be able to more efficiently collect revenue owed by vehicle owners who avoid paying registration fees. " ...

Via Bermuda Transport Control Department: Electronic Vehicle Registration (EVR)

RFID Store Promotion Solution Enables Kimberly-Clark

Kimberly-Clark deploys OATSystems' OAT Mobile Tag to enhance in-store promotions through this mobile RFID tagging solution. The OAT solution supports Kimberly-Clark's implementation of RFID-enabled stores in new geographies. ...

... "Like other consumer product companies, Kimberly-Clark invests significantly in in-store product promotions, using as a primary vehicle a manufactured display that features the promoted product. These displays are typically shipped from Kimberly-Clark's contracted manufacturers directly to retailers' stores. All too frequently, operational challenges prevent these displays from reaching the sales floor at the beginning of the promotional period. In fact, industry statistics show that between 15% to 40% of stores fail to move displays to the sales floor on time, missing critical promotional windows and the opportunity to increase sales. Working with OATSystems, Kimberly-Clark has solved this complex operational problem using the latest RFID technology and a mobile tagging solution.

The solution, which incorporates the Mobile Tagging Station from ADASA, enables Kimberly-Clark's third-party contract manufacturers to apply RFID tags to promotional displays. In-store RFID readers read the displays' tags to record when they reach the backroom of the store and again when the displays reach the sales floor. When a display's tag is read, data is sent to Kimberly-Clark and the retailer showing whether the display has reached the sales floor on time. With this innovation, Kimberly-Clark and its retail customers can intervene promptly when displays fail to reach the sales floor on time. This benefits Kimberly-Clark, the retailer and the consumer by ensuring promoted products are where customers expect them to be. " ...

Via OATSystems: Kimberly-Clark Deploys First Mobile RFID Tagging Solution; Uses OATSystems' Mobile Tag

Walmart RFID WSJ Incomplete Picture of Benefits

Dean Frew, President and CEO of Xterprise, responds to negative article in WSJ that criticized WalMart's RFID program alleging that WalMart is not realizing the benefits originally proposed. ...

... "It is always interesting to me that journalists like Mr. McWilliams write about the same three companies when covering RFID. Beaver Creek, Blyth and Thomasville. These companies together account for about 100,000 cases of RFID enabled product shipped per year out of >100 million cases shipped to Wal-Mart in 2006. Why did Mr. McWilliams not talk with Proctor & Gamble they have publicly talked about their RFID successes and ship millions of RFID-enabled cases of product annually? A number of our clients are each shipping over 1 Million tags a year to Wal-Mart alone and we have seen multiple of our clients that are seeing significant value in managing of promotions. Just because they are not talking about it, does not mean they are gaining value. It is unfortunate when the largest most respected global business publication leads the Market section with such a negative one-sided story with so much wrong information and without any commentary from the subject company. " ...

Via Xterprise: Letter to the Editor (PDF) ...

3M RFID Library Productivity

3M Library Systems introduces new features into its workstations that make them fast, reliable and easy-to-use RFID products in the library environment. ...

... "Like its 3M predecessor model, the 3M Model 946 - with its ergonomic design - performs checkout or return in one step, combining RFID item identification and Tattle-Tape Security Strip from 3M in the same operation. The system also can perform bar code-to-RFID conversions for new acquisitions and smaller scale collections. For visual and audio media, it enables staff to verify that the case and item within match, without opening the case, and can confirm the presence of a sensitized Tattle-Tape Security Strip by means of a verifier light. Also introduced today was the 3M Conversion Station Model 812, an improved self-contained portable system for rapidly scanning bar codes and converting the data for RFID. Compared to its predecessor model, it contains a larger touch-sensitive screen, an easier-to-load 3M RFID tag dispenser, and the capability of converting all 3M RFID tag formats. Similar to its predecessor, 3M Model 812's sophisticated laser scanner is effective for virtually any bar code location or orientation, and provides a visible scan line that helps the user place items correctly. Because it does not require connection to an automated circulation system, the workstation can be easily moved on its cart for use in the stacks. The station also can reprogram RFID tags as items change. " ...

Via 3M Library Systems: 3M Unveils Two Advanced RFID Workstations with Additional Enhancements for Productivity and Security ...

Libraries are increasingly using RFID technology to manage their processes. ...

3M: Wyoming's Largest Public Library Chooses 3M RFID for Expanded Facility:

... "With the 3M RFID system, everything in the library's collection is affixed with an RFID tag. The tag contains a tiny antenna and a memory chip that stores information about each item's identity and allows accurate identification and tracking. A cordless, handheld scanner reads the tags, enabling library staff to easily locate, inventory, check in and check out materials. Unlike barcode systems, RFID does not require line of sight between the tag and the scanner, resulting in easier, more efficient tracking. " ...

Honda RFID Assemply Line: Critical Component Traceability

Honda Italia partners with IBM to implement RFID (Radio Frequency Identification) technology and infrastructure in production processes at its plant located in Atessa, Italy. The solution will enable Honda Italy to increase efficiency and accuracy in managing its motorcycle production in Italy. ...

... "IBM Global Business Services will support Honda Italia in the design and development of the RFID implementation, which will enable the real time, automatic identification of each vehicle along the entire production chain. The RFID tags will also be used on micro-lots of critical components, such as engines. IBM business and technology consultants have been collaborating for a long time with Honda Italia engineers in the design of the new processes and in the identification of the best solution. The RFID technology will be then completely integrated with Honda's existing IT systems through an open standards-based, Linux and Java (J2EE) application built on the IBM WebSphere Application Server to track inventory and to monitor ways to improve efficiency.



The first phase of the project, completed earlier this year, simultaneously with the celebration of the 35th anniversary of Honda Italia, calls for the transformation of Honda's large-displacement bikes (Hornet 600, CBF1000/600/500) assembly line. The RFID tags were used to monitor the traceability of critical components, WIP (Work In Progress) management and inventory replenishment. In the future, RFID tags will also be applied to Honda's scooter production line, starting with the European best seller SH150i/125i and the bigger SH300i. " ...

Via IBM: Honda Italia and IBM Revolutionize Motorbike Production With RFID: Innovation Project at Honda's Plant in Italy Expected to Improve Efficiency and Accuracy ...

Checkpoint RFID Metro Pilot Implementation Solves Technical Challenges

Checkpoint Systems is involved in pilot of UHF RFID technology at METRO Group's Distribution Centres near Hamm, Germany, under supervision of the European Telecommunications Standards Institute (ETSI) task group 34 (TG34). The European Telecommunications Standards Institute (ETSI) plays a major role in the global standardization of Information and Communication Technologies. This pilot has been created to improve the read performance of RFID tags in a high-density UHF reading environment and validate the performance of portal dock door solutions. The successful pilot solves UHF RFID challenges and supports Metro's plan to implement RFID more broadly in 2007. The Metro RFID implementation is aimed at enhancing customer service and increasing the efficiency of its supply chain. METRO Group is an international retailing company with 2005 sales of EUR55.7 billion. The company has a headcount of about 250,000 employees and operates more than 2,200 outlets in 30 countries. ...

... "Utilizing equipment from numerous RFID suppliers in Europe and North America, Checkpoint served as a hardware integrator for the trials. In this capacity, Checkpoint helped with the design work for the hardware solution and procurement, configuration and installation of the 36 RFID-enabled dock door portals which were used to validate successful simultaneous operation of multiple dock doors using a 4-channel synchronized approach under the ETSI 302 208 standard. Pallets containing 62 individually tagged cases largely containing RFID unfriendly materials (such as cans, liquids and metal lined items) were simultaneously transported at warehouse speeds through 36 adjacent loading dock doors. Some 4.5 million individual reads were recorded over the course of the trials. Complying with the ETSI listen before talk (LBT) requirements, the tests achieved a 98.5%+ read rate simultaneously from multiple pallets as they were wheeled through the dock doors. " ...

Via Checkpoint Systems: Checkpoint Systems Partners with Metro Group to Successfully Deploy UHF RFID Dock Door Solution: 98.5%+ Read Rate Represents Milestone in European RFID Deployment ...

RFID Reader Module: Small Form Factor

WJ Communications introduces a low cost, small form factor Gen2 UHF RFID module, the WJM3000, which is based on its WJC200 reader chipset. The WJM3000 is the size of a compact flash card and uses almost 60% fewer discreet components, compared to currently available modules on the market. This RFID module will exceed industry benchmarks for fast inventory time and longer read and write range with worldwide Generation-2 RFID tags. ...

... "Utilizing WJ's RF expertise and leadership in wireless infrastructure and radio frequency identification (RFID) readers, WJ has developed the WJM family of UHF RFID Reader Module products to enable OEMs to offer RFID functionality in mobile devices while maintaining key parameters such as low cost, light weight and extended battery life. The data connectors provide an easy snap on PCB or a cable connection allowing for easy integration.

The main applications for WJM3000 include: RFID enabled Mobile Devices, RFID Enabled Handheld Readers, RFID Enabled Fork Lift Readers, and RFID Portal Reader. " ...

Via WJ Communications: WJ Communications Revolutionize the UHF Gen2 RFID Reader Module Market ...

Secure RFID through Partnership

SkyeTek and Atmel will partner to create secure HF reader and tag platforms for the RFID market. ...

... "The partnership between Atmel and SkyeTek will provide customers with an ultra-secure option for embedded RFID applications. Resulting solutions leverage CryptoRF's security features and the enterprise-class reliability and price-performance of the SkyeTek ReaderDNA and ReaderWare technology. This combination will provide customers with the ability to adapt RFID technology into existing applications and is well positioned to provide valuable solutions addressing ePedigree, patient safety, consumables authentication, item-level inventory management, and ticketing. SkyeTek's ReaderWare also provides the capability to upgrade the reader to support future tags, protocols, and cryptography via a firmware upgrade. " ...

Via SkyeTek: SkyeTek and Atmel Partner to Offer Industry Leading Secure RFID Technology ...

RFID Metal Packaging Works as Antenna

QinetiQ and Crown collaborate to develop adaptation of QinetiQ's Omni-ID Radio Frequency Identification (RFID) technology for use on metal packaging. The improvements will enable RFID tags at the unit-level on metal items. Technology advancement is expected to integrate the metal substrate as part of the RFID tag's antenna. ...

... "This will enable brand owners to integrate ultra high frequency (UHF) RFID tags into metal packaging for a wide variety of applications at the single item level. Designed to mitigate issues such as signal reflection, detuning and grounding which reduce or negate RFID's effectiveness on metal packaging or with aqueous-based products, the unique technology leverages several of metal's inherent properties and shifts the format into an advantageous position.

QinetiQ's standalone Omni-ID tags and integrated Omni-ID packaging technology allows a UHF tag to be mounted directly onto the metal substrate. Measuring substantially less than 1mm in thickness, the unique Omni-ID structure collects and focuses RF energy and enables highly efficient coupling to the chip. Another advantage of the system is that RFID chips require only a short coupling antenna rather than the large dipole usually incorporated in UHF tags, significantly reducing manufacturing costs. Crown and QinetiQ are continuing development of the technology for metal packaging to further optimize design. In the near future, it is expected that the metal substrate itself will have an integral role in the way the technology functions. Using a beverage or food can as an example, the can itself would serve as the antenna, simplifying production of the RFID tag and further reducing costs. " ...

Via Qinetiq: Crown teams up with QinetiQ to resolve challenges of RFID on metal packaging ...

RFID Nano-Battery Technology

mPhase Technologies plans to reinvent the design of batteries, that power portable electronic devices, freeing us from the fire-hazards of lithium ion batteries, ie. the ones that catch fire in laptop computers. mPhase is creating the Smart Nanobattery, which is a radical approach to energy storage using nanograss.

... "The company is developing a battery for potential use in consumer commerce and security applications like active RFID Radio Frequency ID tags; " ...

Via mPhase Tech: mPhase Technologies To Continue Its Development Of A Radical Improvement In Battery Technology Superior To Current Designs ...

RFID Animal Identification and Management

RFID technology supports the management of animals, such as cattle, and enables efficient and effective tracking of samples. ...

... "The animals also had management tags that were paired up with the RFID tag so each animal had two forms of identification. After the tag was read, the animal was given the tuberculin test to be read three days later. " ...

Via The Prairie Star: Animal Identification Using RFID Technology

RFID Adaptive Supply Chain Networks

SAP upgrades its transportation management functionality, as part of the mySAP Supply Chain Management (mySAP SCM) modules to support adapting business processes to optimize revenue across global trade operations. The upgraded software will support ocean shipping management and transportation planning through increased visibility and control of shipments globally. Transportation management costs will be reduced by making the business process more flexible and dynamic using real world aware practices, such as RFID technology. RFID technology integration into the adaptive supply chain will occur through SAP's NetWeaver platform. SAP reports that its existing transportation management software is used by more than 2,200 companies worldwide. This upgrade positions SAP as a strong competitor in the supply chain logistics software market. ...

... "Powered by the SAP NetWeaver platform and leveraging emerging technologies and real world aware practices - using technologies such as radio frequency identification (RFID) tags, smart cards and sensors - mySAP SCM transforms traditional, linear supply chains into adaptive supply chain networks to meet the challenges of rapidly changing market dynamics. These adaptive supply chain networks allow all participants, including suppliers and logistics providers, to sense changes in demand and supply conditions as they occur and to share the critical knowledge needed to respond intelligently. The result is an adaptive supply chain network that is not only demand-driven but can also leverage its assets to influence demand where appropriate. mySAP SCM offers a dynamic synchronization of demand-driven planning, logistics and network execution based on real-time information that provides the capability to synchronize supply with demand by balancing push and pull network planning processes and to replenish and produce based on actual demand; sense and respond with an adaptive supply chain network in which distribution, transportation and logistics are driven and integrated into real-time planning processes; and enable network wide visibility, collaboration and analytics across the extended supply chain. " ...

Via SAP: SAP Helps Companies Meet the Challenges and Reduce the Costs of Global Trade ...

RFID Drug Authentication eCustoms

IBM announces solution that provides ability to share and analyze real-time RFID sensor data to enable drug authentication and e-customs for clients in the pharmaceutical value chain. ...

... "The new technology, WebSphere RFID Information Center, is based on a recently completed EPCglobal standard called EPCIS, which provides a standard way to securely communicate the data created by sensors and RFID tags, and tie it to existing business information and trading partners. The growing trend of item-level tagging will create exponential growth in sensor data well beyond that generated from conventional barcode technology. This creates a need for a new way to manage this explosion of data in a manner that does not overwhelm a business and its supply chain partners. In addition to managing the massive amount of data RFID creates, two other barriers to widespread RFID adoption to date have been the lack of standards and data sharing capabilities. RFID Information Center solves all of these issues, clearing the way for wider-spread RFID adoption in various industries.

The IBM WebSphere RFID Information Center has already been successfully deployed for a number of early-adopter IBM clients across several industries, including consumer packaged goods company Unilever, the e-customs project ITAIDE in Europe, and Big Three pharmaceutical distributor AmerisourceBergen. " ...

Via IBM: IBM Enables Drug Authentication, E-Customs With Release of New RFID Technology ...

RFID Tag: Radiation Resistant

AdvantaPure introduces the GammaTag, an RFID (radio frequency identification) tag that is safely sterilizable by gamma radiation. ...

... "GammaTag provides reliable electronic identification and data storage of single-use/disposable components used in critical process industries, such as pharmaceutical, bioprocess/biomedical, food and beverage, and medical device. GammaTag easily attaches to components such as sample and production bags, tanks, filters, manifolds, tubing and hose, storage vessels, and to complete single-use systems. Several attachment methods - silicone tape, watchband style holders, pouches, and lamination - are available. GammaTag withstands gamma radiation up to 45 kGy (kilograys) and temperatures from -20°C (-4°F) to 85°C (185°F). GammaTag's read/write ability makes it unique, as data may be written directly on the tag, unlike read-only bar code labels or tags. In conjunction with a handheld tag reader and software (known as PET, Process Equipment Tracking), GammaTag allows access to the current status of process components on the spot - simply aim the reader towards the tag to recall information or to write new data to the tag. " ...

Via AdvantaPure: AdvantaPure Introduces the Only Read/Write RFID Tag That's Gamma-Radiation Resistant ...

RFID Starter Kit

Kanda offers RFID starter kit. The kit has a combined reader and programmer. It supports ISO15693 RFID Tags and will also read ISO14443A RFID tags. ...

... "Apart from a programmer and reader unit, the Kanda RFID kit includes an RF detector that gives an indication of the RF field strength near a reader, which helps both in development and in the siting of units. However, the most important part of the starter kit is the software package. The protocol used is very flexible to allow engineers to design their own systems to suit their needs, rather than being constrained by the limitations of the software. As well as the standard read, write and lock functions, the protocol allows for continuous read, and includes anticollision algorithms that deals with multiple tags in the reader field. " ...

Via Kanda: RFID Made Easy; New Starter Kit Simplifies Process of Creating Applications Using RFID Systems

RFID Technology Enables Asia Logistics for Metro Supply Chain

The METRO Group and Savi Networks will collaborate to implement the Advanced Logistics Asia (ALA) project. The project will deploy RFID radio frequency identification technology to monitor the location and security of inventory shipped from Asia to Europe in real-time through the supply chain. ...

... "The ALA project, managed by METRO Group Buying Hong Kong (MGB Hong Kong), will utilize SaviTrak(TM), a web-based, real-time information service that leverages automatic data transmissions from Electronic Product Code (EPC) - compliant passive and active RFID tags, among other wireless devices, on shipments transported throughout the global supply chain. MGB Hong Kong manages METRO Group imports from sourcing to delivery at Distribution Centers in Germany. Under the ALA project, SaviTrak will monitor a variety of retail products while they are transported through a global RFID reader network, stretching from a consolidation center in Hong Kong, through the Port of Hong Kong, to the Port of Rotterdam, the inland Port of Duisburg in Germany and finally to a METRO Group distribution center in Unna, Germany.



Active, battery-powered RFID tags on containers will be utilized to automatically transmit information into the SaviTrak information service. As a six-month pilot, the ALA project is designed to evaluate improvements in the visibility, management and security of inventory while it is transported end-to-end. The project will further evaluate investment returns in reduced lead times and inventory, improved customer service as well as supply chain and financial performance." ...

Via Savi Networks: The METRO Group and Savi Networks Launch Real-Time Information Service on Inventory Shipped From Asia to Europe

RFID Supports Nissan Continuous Improvement Initiative

Nissan implements a continuous improvement initiative to target vehicle labor cost reduction, increase logistics throughput accelerating customer service, and enhance vehicle quality through defect elimination early in the product lifecycle. The initiative will be enabled by a wireless architecture and active RFID technology in the Nissan Canton MS manufacturing facility, supplied by WhereNet. ...

... "As part of a continuous improvement initiative at its four-million square foot assembly plant in Canton, Mississippi, Nissan will leverage a single wireless architecture to run multiple WhereNet applications, including the WhereSoft Yard Management System (YMS) and Vehicle Tracking and Management System (VTMS), to improve production velocity and throughput, labor productivity, and vehicle quality. Nissan's Canton assembly plant has the capacity to produce 400,000 vehicles per year, including the Altima sedan, Armada full-size sport utility vehicle, Infiniti QX56 full-size sport utility vehicle, Quest minivan, and Titan full-size pickup truck.

Deploying the WhereNet single wireless infrastructure over the entire Canton complex will take less than 90 days. The hardware consists of 1500 active RFID WhereTag transmitters, which are temporarily attached to new vehicles as they roll off the assembly line as part of the WhereNet VTMS system; 700 WhereTag transmitters that are permanently fixed to trailers belonging to Nissan's dedicated suppliers or temporarily attached to others as part of the WhereSoft YMS application; 120 WherePort magnetic exciters positioned between gates and at key choke points across the complex; and a local infrastructure of 80 wireless WhereLAN locating access points.

Nissan also plans to deploy the WhereNet automated gate check-in/out solution known as Fast Gate that supports 24x7 sequenced parts deliveries from Nissan suppliers. Fast Gate senses when a truck is approaching the gate; cross-references detailed information about the truck in a database; and, if authorized, automatically opens the gate to grant entry. Then, based on business rules loaded into the WhereSoft yard management application, the system instructs drivers and yard personnel to deliver the inbound load to the appropriate dock door for just-in-time sequencing of parts based on the assembly line build plan for that work shift.



When new vehicles roll off the Nissan assembly line, each vehicle is assigned an active RFID WhereTag transmitter that is married to the vehicle identification number (VIN). The WhereTag remains on the vehicle until it has been processed and is ready to ship to its final destination. Nissan uses the WhereNet VTMS in off-line areas to manage post-assembly verification and test processes, as well as quality repair, containment and shipping zones. The system includes a logical hierarchy of rules that manages the processing of every vehicle in accordance with its assigned status so that critical orders are processed before lower-priority units. " ...

Via Wherenet: NISSAN SELECTS WHERENET'S LOCATABLE, ACTIVE RFID SYSTEM TO AUTOMATE INBOUND SUPPLY CHAIN AND OUTBOUND DELIVERY CHAIN ...

Philips RFID: Healthcare Assets

Philips RFID technology is focused on the healthcare market combined with services. The first customer to deploy the Philips asset tracking solution is the University Medical Center (UMC) in Tucson, Ariz. Philips installation at UMC is one of the healthcare industry's largest Wi-Fi-based asset tracking projects. This RFID implementation covers eight floors and a million square feet with 2,300 RFID-tagged assets in use throughout the hospital. The hospital workforce will use the Philips RFID solution to track and manage medical equipment, such as infusion pumps, beds, monitors, wheelchairs and other portable devices. ...

... "Helping hospitals to focus on the patient, Philips' asset tracking solution helps locate hospital assets through Radio Frequency Identification (RFID) technology. The solution is designed to work within existing wireless infrastructure, allowing hospitals to leverage investments they have already made in wireless technology. Philips' asset tracking solution consists of a suite of services to maximize the solution's benefits, including wireless tags, a location engine and the MobileView user interface. Product tracking information is fed into the location engine and the asset's position can then be portrayed on a map, in a table, or in a report format for any networked hospital user. In addition to pinpointing lost equipment, the information gathered from the asset tracking solution can help improve asset utilization and work flow efficiencies.

The Philips asset tracking solution is designed around each hospital's specific use cases to help solve problems such as productivity, regulation requirements, utilization, theft, and loss. With an understanding of the unique requirements that the healthcare environment demands, Philips has an advanced solution that can enable hospitals to make facility-wide improvement. The Philips asset tracking solution utilizes technology that includes wireless tags, a location engine, and the MobileView user interface. The tags, which can be attached to most mobile assets, transmit to the hospital’s existing 802.11 infrastructure. This information is fed into the location engine and the asset's position can then be portrayed on a map, or in a table or report format for any networked hospital user. " ...

Via Philips: Philips Delivers New Radiology Products At 2006 RSNA That Present Clinicians with a Clear View of Patient Data and a Clear Path to Patient Care

RFID Pioneer: CTO Role at Sirit

Bruce Roesner has been appointed to the position of Chief Technology Officer and Vice President of Engineering at Sirit, where he will manage RFID product and solutions development across all application focus areas. ...

... "After starting his career with industry leaders like Hughes Aircraft Company, Burroughs Corporation and Applied Micro Circuits, Bruce has been an entrepreneur and technologist in the domains of IC design and RFID. He was the founder of a number of technology companies including Instant Circuit Holdings, SCS Corporation and ClarIDy Solutions. He was instrumental in the development of low-cost RFID tags used in inventory tracking and control applications which won him Most Innovative Product and Entrepreneurial Team of the Year awards. Mr. Roesner is the author of numerous publications and presentations on the subject of high technology electronics including RFID. He is also the holder of over 25 patents and earned a M.S.E.E. and Ph.D. in Solid State Electronics from Purdue University. " ...

Via Sirit: Sirit Appoints Pioneering RFID Engineer to Lead Development Team ...

HighSpeed RFID Read Rates: Pharma Cases

Impinj discusses results of live demonstration of RFID technology in pharmaceutical packaging application with Owens-Illinois (O-I) at the RFID Health Care Industry Adoption Summit in D.C. ...

... "In pharmaceutical manufacturing and fill-line demonstrations, a near-field UHF Gen 2 RFID solution, comprising Impinj's Speedway reader and O-I's item-level embedded RFID tags powered by Impinj's Monza chips, achieved 100% reliability when reading and writing tags at high speed on pharmaceutical bottles. In the first demonstration, the UHF Gen 2 system programmed 96-bit EPC numbers at rates exceeding 600 tags per minute on bottles containing the four most common dose types - liquids, gel caps, solids and powder. In the second demonstration, the system developed by Impinj and O-I flawlessly read 600 tags per minute on cases containing 48 individually tagged bottles and a case-level tag. " ...

Via Impinj: Impinj-Powered UHF Gen 2 RFID Solution Delivers Exceptional Results for Item Tagging of Pharmaceuticals

RFID Pilot: Cardinal Health Completes

Cardinal Health completes its RFID pilot, which tested RFID tags for end-to-end pharma packaging and distribution business processes. The pilot tested the application of tags and the utilization of item level tracking techniques. Alien Technology, IBM, and Verisign provided hardware, software and implementation services. The application and encoding of the RFID tags approached 100 percent success rates. Reliable read rates were best achieved at the individual case level. The pilot was a fruitful learning experience for the pharma industry. ...

... "The pilot program tested whether ultra-high frequency (UHF) radio frequency identification (RFID) tags could be applied, encoded and read at normal production speeds during packaging and distribution of pharmaceuticals. Verifying the authenticity of medications along each step of the distribution process adds an additional layer of security to lessen the chance of counterfeit pharmaceuticals entering the supply chain. It is also hoped that RFID data could improve efficiencies in the supply chain. Pilot Program Background: In conducting the industry's first end-to-end pilot program, Cardinal Health used new technology to place RFID tags on the labels of brand-name solid-dose prescription drugs, then encoded the electronic product code (EPC) standard data at the unit, case and pallet levels during the packaging process. The products were shipped to a Cardinal Health distribution center in Findlay, Ohio, where the data was read and authenticated as products were handled under typical operating conditions. Normal procedures were enhanced with RFID hardware and software from Alien Technology Corporation and IBM along with project management support from VeriSign.

RFID Labeling and Online Encoding: Data collected from the pilot suggest that it is feasible for RFID tags to be inlaid into existing FDA-approved pharmaceutical label stock, and the tags can be applied and encoded on packaging lines at normal operational speeds. Online encoding yields were 95 percent to 97 percent, and fine tuning of the process is expected to produce yields that approach 100 percent. The RFID tag application and encoding requires minimal adjustments to current labeling and packaging lines.

RFID Read Rates: Unit-level read rate data varied widely depending on the locations and type of reading stations throughout the supply chain. Highly reliable unit-level read rates in excess of 96 percent were found when reading individual cases one at a time and when reading units mixed with other products in tote containers prepared for delivery to a pharmacy. However, as expected, unit-level read rates were not found to be reliable when attempting to read units within a full pallet of product. " ...

Via Cardinal Health: Cardinal Health Releases RFID Pilot Results ...

RFID Pharma Supply Chain: Track and Trace EPCIS Pilot

AmerisourceBergen announces innovative Track and Trace Program that will benefit the pharmaceutical supply channel. Its pilot program connects AmerisourceBergen's EPCIS directly to other business partner EPCIS systems and to specific pharmaceutical manufacturer systems. In Q1-2007, VeriSign will provide authentication services and enable visibility across multiple EPCIS systems. ...

... "AmerisourceBergen has been a leader in protecting the integrity of the pharmaceutical supply channel, first by pledging over one year ago to purchase 100 percent of its pharmaceutical and other products directly from the product manufacturer, and now by launching a unique Track and Trace initiative which will utilize RFID and Electronic Product Code Information System (EPCIS) technology to track and trace products throughout the entire distribution process. AmerisourceBergen plans to formally launch the Track and Trace pilot program at its largest distribution center in California by the end of 2006. In the pilot, AmerisourceBergen will use IBM's RFID middleware and embedded software on readers to read RFID tags currently used by certain pharmaceutical manufacturers as those products enter the distribution center. The unique product ID from each RFID tag will be electronically stored in IBM's EPCIS, which will be the platform for secure electronic communications back to the product's manufacturer. This secure information exchange will allow AmerisourceBergen and its trading partners to work collaboratively to share transaction information and further secure the supply channel. As new orders come into the AmerisourceBergen distribution center, the RFID system can monitor product placed in shipping totes as they move through the picking, packing, and shipping processes. As each tote leaves the distribution center the EPCIS software will record the time and location of each unit leaving the premises as well as its intended destination so that AmerisourceBergen has a complete record of the history of all RFID tagged drugs. " ...

Via AmerisourceBergen: AmerisourceBergen Announces Innovative Track and Trace Program for the Pharmaceutical Supply Channel

RFID Manages Metro Shrinkage

Metro partners with Checkpoint to implement RFID source tags to reduce shrinkage across a significant number of stores across multiple countries. ...

... "The strategic agreement, which includes worldwide store installation of NDRF (New Digital Radio Frequency) technology and source tagging, will help METRO Cash & Carry to minimize shrinkage and reduce operational costs by using only one supplier, Checkpoint Systems, and implement source tagging, with the ultimate aim of improving their customers' shopping experience. Installation of 3G NDRF (called Liberty PX in North America) antennas and deactivators is planned for the more than 425 Cash & Carry self-service wholesale stores in 28 countries, making it the most international EAS (Electronic Article Surveillance) roll out of its kind. The global shrink management solution provides METRO Cash & Carry (under METRO and MAKRO brand names), with product protection throughout the entire supply chain, from manufacturing and distribution to the point of sale, where the RF tags on the item are deactivated. This eliminates the need for employees to spend time physically securing the tags in-store or removing them at point of sale. " ...

Via Checkpoint Systems: METRO Cash & Carry Selects Checkpoint Systems as Their Exclusive Shrink Management Global Partner

RFID Read Range Clipped

IBM clips RFID tags wil permit consumer to tear off part of the antenna, decreasing the read range. ...

... "Marnlen will produce labels with RFID circuitry stretched across perforated paper. " ...

Via The Bryan-College Station Eagle: New technology clips RFID's range ...

ClipTag RFID: IBM LIcenses

IBM's Clipped RFID Tag gives privacy protection to the consumer through visual confirmation of the tag modification. ...

... "IBM announced it will license its acclaimed Clipped Tag technology to Marnlen RFiD, who will begin production of the tags and offer availability immediately. The Clipped Tag, developed at IBM's Watson Research Center, allows consumers to tear off the majority of an RFID tag's antenna, reducing the tag's read range to just a few inches, ensuring consumer privacy while maintaining the benefits of the technology, such as product authentication or recalls. " ...

Via IBM: IBM Licenses Clipped Tag RFID Technology to Marnlen RFiD ...

Savi RFID: China Ready

China State Radio Regulation Committee (SRRC), a division of the China Ministry of Information Industry, grants Savi Tech approval to implement its family of active Radio Frequency Identification (RFID) products throughout the country. Savi's tags and readers are compatible with the ISO 18000-7 (International Standardization Organization) standard for active RFID products. ...

... "By approving Savi's hardware equipment, China has authorized the use of active RFID products compatible with ISO-18000-7. These product approvals in China, combined with similar prior approvals in North America, South America, Europe and Pacific Rim markets such as Australia, Korea, Taiwan, Singapore, and Hong Kong, clearly show the solid support for the 433 MHz frequency as the worldwide choice for active RFID, Jennings said. Following extensive testing and document reviews, SRRC has issued Savi Technology a Radio Transmission Equipment Type Approval Certificate and Code for five of the company's flagship hardware products, including tags, readers and signposts. " ...

Via Savi Technology: SAVI TECHNOLOGY'S ACTIVE RFID SUPPLY CHAIN PRODUCTS APPROVED FOR USE IN CHINA ...

RFID Packaging Machinery Applications ...

Applications of RFID technology to packaging machines will be demonstrated at the Pack Expo upcoming. ...

... "RFID PAVILION: The Radio Frequency Identification (RFID) Pavilion will again highlight solutions that meet the requirements of the entire supply chain. Included in the exhibits will be technologies to upgrade conventional lines into RFID-enabled packaging lines capable of applying multi-pack, case and pallet tags online. Also view the latest advances designed to verify the presence of tags, write to the tags and validate data on the tags.

WHEN: October 29 - November 2, 2006 9 am to 5 pm Sunday through Wednesday 9 am to 2 pm Thursday

WHERE: PACK EXPO International 2006 McCormick Place Convention Center Chicago, Illinois " ...

Via PRNewsWire: Packaging Machinery Manufacturers Institute (PMMI): Leveraging the Power of Packaging to Grow Brand Sales ...

RFID Out-of-Box Solution: SMB Market

Intermec partners to create an out-of-box RFID compliance experience for suppliers to the retail industry and the Department of Defense. This is especially critical for small and medium sized businesses (SMB market) as this RFID kit enabled them to accelerate their RFID compliance efforts. The kits include everything required to meet RFID compliance mandates, generate and apply Generation-2 RFID tags, and verify tag information. This is a time-saver as it enables an SMB customer to accelerate to the integration testing phase. ...

... "To generate a label, customer order information and the customer-stipulated label format is transmitted by the Intermec portable terminal to the PM4i printer's on-board encoder, which translates the information and prints it into an RFID-readable tag, barcode or human readable label. The printer's embedded reader then scans and verifies the tag's information before it is placed on a carton or pallet. The Intermec 751, operating with an attached IP4 portable reader, or the IF5 fixed RFID reader then re-verifies the order information and confirms shipment. The Informs kit comes with stand-alone PC-based compliance software that includes all standard retail and DOD-compliant label formats, so users have easy and immediate access to compliant label formats. The software can act as a stand-alone shipping application and interoperates with all ERP software for complete system integration. A key component of the system, EPC Solutions' Tag Manager software contains GTIN and SSCC smart labels information and allows users to immediately begin shipping cases and pallets with standards-compliant, up-to-date labeling. " ...

Via Intermec: Intermec and Informs Deliver Affordable, Streamlined RFID Compliance Kit

RFID Partnership Implement Location Tracking ...

Atos Origin and Globe Ranger partner to deliver RFID location tracking solution for FloraHolland to automate the auction inventory process. ...

... "Atos Origin and GlobeRanger, the leading provider of Radio Frequency Identification (RFID), mobility and sensor-based software solutions, announced a strategic partnership that will offer innovative RFID services to the market. FloraHolland, the largest flower auction company in the world, is the first customer where their joint RFID solution is implemented. FloraHolland is a co-operation of flower and plant growers worldwide that had a turnover of over 2 billion Euros in 2005. Each day approximately 4,000 buyers (dealers and exporters) from around the world purchase fresh flowers in its international trade center, using 26 auction clocks online or using FloraHolland's direct sales force. FloraHolland houses flowers from approximately 7,000 growers worldwide. FloraHolland is a warehouse that is about the size of 100 football fields and one of the largest commercial warehouses in Europe. During the daily auctions, more than 100.000 trolleys of flowers are constantly being moved from one location to another for selling and shipping to the world wide customers. Atos Origin's implementation of GlobeRanger's iMotion solution for FloraHolland applies RFID technology to capture location data of flowers in moving trolleys, as well as to make this information available instantly for the auction's IT systems, and employees. RFID makes it possible to log all movements of every individual trolley and control the process. The trolleys and tractors have RFID tags and there are RFID loops embedded in the floor. " ...

Via Atos Origin: Atos Origin and GlobeRanger start implementation of innovative RFID solution at FloraHolland

HP RFID: DataCenter Asset Tracking ...

Meijer, a large privately held retailer, tests HP RFID solution for the tracking of assets in the data center. HP is investing in RFID technology to help retailers and manufacturers optimize their supply chain costs while accelerating the speed to market. ...

... "HP announced its researchers have created a radio frequency identification (RFID) asset tracking technology for data centers and successfully tested it at a major retailer. The technology was developed by HP Labs, the company's central research facility, and tested at Meijer Inc., a retailer with more than 170 grocery and specialty stores in the midwestern United States. The solution could automatically monitor data center assets, providing real-time tracking and auditing of servers, networking equipment, server and storage enclosures and other technology using RFID.

The technology uses RFID readers and RFID tags to monitor the location of individual components within the data center, including the addition of new devices and device movement to other areas. The sensing infrastructure creates a high-resolution view of devices throughout the data center. The system also can provide historical data related to additions, changes and moves of servers and server-related equipment. " ...

Via HP: HP Creates RFID Technology for Tracking Data Center Assets:

RFID Library System: Working Through The Issues ...

Implementation of RFID system at local library works through typical start-up issues: customer communications, data management, and interesting suprises, such as more accuracy inventory. ...

... "The RFID system uses stamp-sized electronic tags to track the location of library materials, permitting librarians to more effectively manage the collection and decrease thefts. " ...

Via LongmontFYI: City library struggles ...

RFID Battery-Assist Passive Tag: Supports Logistics and Manufacturing ...

Intelleflex RFID tags can be used by logistics companies and in manufacturing in long-range, battery-assisted mode for real-time inventory tracking of assemblies in the warehouses. The RFID system can automatically generate a proof of shipment when assemblies are shipped. When used in maintenance operations in passive mode, companies can realize significant benefits from having actionable manufacturing and repair history data in the 64Kb user memory of the RFID tag at the point of use. ...

... "Intelleflex's InfoSure tags and the I-Beam reader are multi-protocol, ensuring global interoperability using EPC standards. InfoSure tags can be used as passive C1G2 tags with any other C1G2 reader or used in the battery-assisted passive mode at long ranges with the I-Beam reader. InfoSure tags offer up to 100-meter read/write range in free space, which translates to 100 percent read/write reliability at standard working ranges in industrial environments. They also offer 64 kb user memory, which is segmented into 1 kb blocks so they can be independently protected for read/write access through passwords. The I-Beam reader can read any EPC C1G2 tag as well as the Class 3 InfoSure tag. Initial product shipments of both the tags and readers are targeted for asset management, yard management, manufacturing and zonal access control applications. " ...

Via Intelleflex Corporation: Intelleflex Announces Availability of its RFID Battery-Assisted Passive Tag and Reader Products ...

DOD RFID Dept of Defense Implementation Enablers

ODIN Technologies shares some of the key ingredients (Accuracy and Implementation Speed) to enabling their successful implementation of RFID technology in the DOD supply chain. The Dept of Defense has strict read rate accuracy requirements that ODIN had to meet with limited technology capabilities at that time. In addition, ODIN perfected an implementation methodology for the DOD that improved the speed of delivery while sustaining performance quality. ...

... "DoD is modernizing its logistics system to better support the warfighter. Passive RFID is at the center of that transformation. It is a core element of the DoD's force transformation initiative designed to create a more agile military. However, if the tags and readers do not communicate reliably, the benefits will not materialize. After years of planning, the DLA needed a highly accurate RFID network established rapidly.

...

Accuracy: DoD expected its RFID system to be an order of magnitude more sophisticated than what was currently being deployed. Boundaries relative to read-rates and performance were strict, unlike many retailers who have toyed with trial-and-error methods. Rather than just attempt to read a single pallet tag, the DoD demanded 20 Gen 1.0 and Gen 2.0 RFID tags be affixed to cases and read as they come through a dock door - 100% accurately. This required scientific precision when designing and configuring the RFID network. Each portal was tested 10 times for that performance criteria. The DoD has shown RFID will reduce costs, increase supply visibility and streamline its entire supply chain, from the factory-to-the-foxhole. However, it can only do this if the RFID system is accurate and reliable.

...

Implementation Methods and Speed: Eighteen facilities spanning the continental U.S. (CONUS) were evaluated, solutions designed, installed and tested to 100% accuracy in under 130 days. " ...

Via ODIN Technologies: DOD Case Study (PDF) ...

RFID Case Tracking: BestBuy Compliance ...

NetGear complies with BestBuy RFID mandate through services of APL Logistics. ...

... "Global supply chain management leader APL Logistics has won the RFID tagging solution business of Silicon Valley-based NETGEAR, a leading provider of wireless networking equipment. Under terms of the agreement, APL Logistics will affix Radio Frequency Identification tags to cases of NETGEAR product sent to selected Best Buy stores in the U.S. The deal highlights a growing trend among major retailers who mandate that their suppliers use Radio Frequency Identification (RFID) tags on shipments. It also confirms APL Logistics' role as an innovative provider of the technology for supply chain management. " ...

Via APL Logistics: NETGEAR Turns to APL Logistics for RFID Mandate

RFID Wireless Toll Payment

Transcore receives expanded order for RFID tags that enable the Jamaican wireless toll payment system. ...

... "Jamaica's Highway 2000 expands toll collection infrastructure with opening of Portmore gateway, completing the first phase of a three-tiered project. Jamaican Infrastructure Operator, which operates the roadway for the TransJamaican Highway Ltd., increases order for TransCore radio frequency identification (RFID) eGo tags. The paper-thin windshield sticker tag, which operates at 902-928 MHz frequency band, expands global use providing an economical RFID tag technology that can increase patrons' migration to wireless payment of tolls and speed traffic throughput. " ...

Via Transcore: Jamaica Highway2000 Expands Toll Collection System, Increases RFID Sticker Tag Use Worldwide ...

RFID: Alien Tech World Tags ...

Alien introduces RFID tags that will operate across the world. ...

... "Alien World Tags enable companies to manufacture products on one continent and ship them worldwide utilizing a single RFID tag that exhibits uniform behavior and delivers consistent performance regardless of its destination. When used with Alien Enterprise RFID Readers, this enables companies to deploy a common RFID infrastructure worldwide, thus reducing the number of infrastructure designs, software interfaces, development projects and equipment models they need to ensure accurate, reliable tag reads across their global supply and delivery chains. Consequently, upfront implementation and ongoing maintenance costs are minimized, overall RFID effectiveness is maximized, and returns on RFID investment can be accelerated. " ...

Alien Technology Expands Gen2 RFID Tag Family

RFID Podcast: Technology for CEOs ...

Podcast on RFID technology for CEOs ...

... "While WalMart, Target and other retailers have begun to require suppliers to use RFID tags on shipments, there have not been as many full-scale roll-outs of the technology " ...

Via Business Week: The CEO's Guide to RFID

Printed RFID Tags: Near Future?

Printed RFID tags to enable low-cost item level tagging may be within reach. ...

... "While a printed RFID tag will never be as inexpensive as a bar code - since bar codes require only one color of a conventional ink that may already be used to produce product packaging - printed RFID tags would bring item-level tagging to a wide range of products that, today, are economically out of reach. " ...

Via AIM: RFID: Objects in the Future May Be Closer Than They Appear ...

RFID InkJet Printable Tags

FujiFilm Dimatix work to advance its capabilities in printable RFID tags using ink-jet printers. It has demonstrated capabilities in various sizes and materials on multiple substrates. ...

... "FUJIFILM Dimatix, Inc., a leading provider of commercial and industrial ink jet products, announced that it has repeatedly used its revolutionary ink jet technology to print silver fluid with features of less than 20 microns. With the proven capability to precision print 1 picoliter-sized drops of organic and inorganic materials on a large variety of substrates, the company is continuing to pave the way for an entirely new way of developing and manufacturing electronic books, printed polymer backplanes, printed sensors, complete RFID tags and other flexible electronics.

The Dimatix Materials Printer (DMP) is the world's first complete, low-cost system for high-precision jetting of all kinds of functional fluids on any type of surface, including plastic, glass, metal sheets, silicon, membranes, gels, thin films and paper. By directly printing on their own substrates, customers can rapidly develop prototypes and keep process technology in-house. The printer's small size and low price make it convenient, easy to use and cost-effective to own. Featuring single-use cartridges that customers can fill with their own fluid materials, the system minimizes waste of expensive materials. " ...

Via Dimatix: FUJIFILM Dimatix Enables Direct Printing of Silver Fluid with Features of Less than 20 Microns ...

FUJIFILM Dimatix Materials Deposition Division is evolving ink jetting technology into a production process that lowers the cost, time and environmental impact of producing electronic circuits and functions for RFID tags, flat panel displays, circuit boards and other electronic and bioscience applications.

RFID Middleware: Automate Integrate ...

Reltronics Technologies has made their system, SmartInstrument, a versatile middleware for automatic Radio Frequency Identification (RFID) systems, widely available in the marketplace. Reltronics strengths lie in automation and identification using remote RFID technology. The SmartInstrument middleware system plays a role in supporting interoperability and integration of multiple, potentially incompatible, solutions. ...

... "One of Reltronics Technologies' fortes is in creating and supporting RFID systems that assist in automating asset and inventory management, identifying drug pedigrees, etc. and which rely upon storage and remote retrieval of data using RFID hardware (Readers, Antennas, Tags or Transponders). Retailers such as Wal-Mart and Target have whole-heartedly accepted the RFID concepts to implement efficiencies in their workflow and to limit inventories in their warehouses and they have subsequently initiated mandates to their vendors to implement RFID technology in their supplies within set timelines. These mandates are allowing shorter timelines and the industry not only needs many new deployments but also sustain existing deployments. SmartInstrument is a step forward to facilitate transparency in the RFID systems deployment thereby bringing commonality between various RFID protocols and hardware technologies (reader, antenna, and transponders or RFID tags), irrespective of the technology being new or old.

For instance, SmartInstrument enables end-users to deploy new RFID systems while seamlessly supporting all existing RFID systems and eliminating the need for single- sourcing thereby achieving a better return of investment. It fills the need by interpreting any RFID system utilizing any reader (Active, Passive), working on any frequency (LF, HF, VHF, UHF), with any communication protocol (Ethernet, WiFi, RS-232, RS-485), any transponder (Active, Passive), and any standard (EPCGlobal, ISO, AIMGlobal) bringing the much needed commonality into the RFID infrastructure. Reltronics Technologies' focus on bringing interoperability and sustainability into the RFID technology environment is the result of industry satisfaction with the RFID initiative, to enable overcoming the customer perception of which RFID technology to deploy, to enable commonality between the various RFID protocols, to enable a more cost-effective RFID system deployment, and finally to allow the end-users to start small with one RFID system and expand at their own financial pace without having to worry about the RFID system being antiquated. " ...

Via Reltronics: A Novel Idea to Harmonize Automatic Radio Frequency Identification (RFID) Systems ...

RFID Cargo Terminal Operational: Chain of Custody ...

Savi implements RFID-enabled chain of custody process at the Port of Felixstowe (PFL) in the UK. The system, called SaviTrak, automates the tracking of cargo as it is processed through the supply chain, while monitoring security. ...

... "Network infrastructure, including SaviTrak software and Radio Frequency Identification (RFID) readers, are now installed and operational at PFL's Trinity Terminal, the largest cargo-handling facility in the United Kingdom. The readers, which are placed on dockside cranes and at entry and exit gates, automatically capture chain of custody handoff points for containers equipped with international standards-based RFID tags. The real-time data is routed to the web-based network software, which transforms it into actionable information that enables SaviTrak customers to make better supply chain decisions. The SaviTrak information service is offered via an open technology platform, which accommodates multiple and interoperable Automatic Identification and Data Collection (AIDC) technologies, such as barcodes, EPC-compliant passive and active RFID technologies, and Global Positioning Systems (GPS) used to track ships and trucks that transport ocean containers. Active RFID technologies used are compatible with the ISO 18000-7 standard, and sensor seals are compatible with the ISO 18185 draft standard. " ...

Via Savi Technology: SAVI NETWORKS EXTENDS SAVITRAK REAL-TIME INFORMATION NETWORK TO UNITED KINGDOM'S PORT OF FELIXSTOWE ...

RFID CCTV Airport Security Speeds Flow ...

Optag is an RFID system integrated with closed-circuit CCTV television that enables passenger monitoring and security, while speeding the flow of passenger traffic. ...

... "This project will deploy networks of enhanced Closed Circuit Television (CCTV) systems coupled to local, direction based, and passenger tracking system using a far-field Radio Frequency Identification (RFID) tags. The system will facilitate real-time location of individual passenger within the airport, the analysis of both mass traffic & individual behaviours, and, where appropriate, the semi-automatic control of CCTV based vision systems to observe and record suspicious or unauthorised activity. " ...

Via AeroScratch: RFID Projects ...

Monza RFID Tag Readers Gen2 Interoperable ...

Impinj's Monza RFID chip and Speedway readers are certified for Generation-2 interoperability. ...

... "Leading Gen 2 RFID solution provider, Impinj, Inc., announced that EPCglobal Inc., the not-for-profit standards organization dedicated to driving global adoption of the Electronic Product Code (EPC) for supply chain excellence, has awarded interoperability marks to Monza tag chips and Speedway readers, certifying that these Impinj products comply with EPCglobal's Gen 2 standard and interoperate with other certified devices. Third-party testing firm MET Laboratories conducted EPCglobal's product interoperability testing as part of an extensive hardware certification and standards compliance program for RFID chips, tags, readers, and printers. MET Laboratories also performed EPCglobal's RFID Gen 2 compliance testing in September 2005, awarding Gen 2 compliance certification marks to Impinj's Monza chip and Speedway reader at that time.

Impinj is the only company to have earned Gen 2 interoperability certification for both tag chips and readers. Monza chips and Speedway readers enable Powered by Impinj solutions available from a variety of RFID vendors and are key components of recent RFID deployments. Impinj has shipped Monza chips in high volume to the industry's leading RFID tag and inlay vendors worldwide since the Fall of 2005. " ...

Via Impinj: Impinj’s Gen 2 RFID Monza Tag Chips and Speedway Readers Earn EPCglobal Interoperability Certification ...

Walmart RFID: Gen2 Tag Implementation ...

Walmart will continue its implementation of RFID technology as it expands the number of targeted stores and plans conversion to Generation 2 tags. ...

... "WalMart Stores, Inc. will bring another 500 stores and clubs online with its RFID (radio frequency identification) initiative by the end of this fiscal year, bringing the total number of its retail locations using the technology to more than 1,000. The company has more than 3,900 locations in the United States.

The benefits of RFID, especially with regard to reducing out-of-stocks, as well as reducing excess inventory, have been documented in a 2005 study by the University of Arkansas. Ford noted that all WalMart installations moving forward would only read Gen 2 tags. As the remaining pallets and cases with Gen 1 tags make their way through the distribution network, WalMart will convert all of its systems to only read Gen 2 tags.

As predicted by industry experts, the cost of the technology continues to fall while performance continues to improve. WalMart expects this trend to continue as users adopt the Gen 2 tags, which, as envisioned, are becoming the industry's global standard thanks to significant work by EPCglobal and its members. Ford said that WalMart continues to work with its next 300 largest suppliers, which are expected to begin shipping test cases in October. These suppliers will go live with their shipments in January 2007, bringing to more than 600 the number of supplier companies using RFID technology in concert with WalMart. " ...

Via Walmart Stores: WalMart Continues RFID Expansion