RFID Flexible Organic Device

European project PolyApply demonstrates 13.56 MHz RFID (radio frequency identification) transponder fully made of flexible organic devices. ...

... "This is a significant result towards the realization of low cost high volume organic RFID tags, because all components are made with inline compatible processes. It also demonstrates that various material classes and processes developed by the consortium, from evaporated molecules to printed polymers, are suitable for the use in the new organic electronics technology. Having a high volume production in mind, the development of materials and processes is accompanied by an environmental impact assessment, focusing among others on energy consumption and balance of materials. " ...

Via PolyApply: 13.56 MHz RFID Demonstrator Made of Flexible Organic Devices

Medical RFID Detects Reflux in Esophagus

Research has shown new RFID device to identify simulated stomach acids and transmit results through human tissue. The RFID-enabled sensor detects stomach acid, gas and water. Testing will shift to animals before tests in humans. ...

... "The new system involves pinning a small, flexible RFID chip to the esophagus, where it remains until removed by a physician. The chip, about two square centimeters, or a little bigger than a dime, tests for electrical impulses that signal acidic or nonacidic liquids moving through the esophagus. It then transmits data to a wireless sensor worn around the neck. " ...

Via UT Southwestern Medical Center: Doctors, engineers develop new wireless system to detect esophageal reflux

RFID Warehouse Forklift System

Intermec introduces forklift RFID system that integrates automated data collection to drive efficiency in warehouse business processes. ...

... "This ground-breaking RFID (radio frequency identification) forklift installation system allows forklift drivers to use RFID and other data collection technologies to gather complete real-time inventory data efficiently and safely without leaving their vehicle. Intermec partnered with Cascade Corporation, the world leader in the design and manufacture of lift truck attachments, to create an RFID-enabled forklift system that integrates durable, rugged inventory and data collection technology with existing forklift equipment. The system improves performance and safety while significantly reducing the cost of RFID forklift deployments in warehouse applications. The Intermec Adaptable Load Backrest and Antenna Cell system can be made to accommodate almost all forklifts on the market, providing customers a factory-certified product designed specifically for their lift trucks that meets OSHA and industry safety requirements. Flexible and configurable, the Adaptable Load Backrest switches easily from one application to another, allowing the driver to accomplish pallet-, case- and even shelf-level readings without the costly and intensive labor associated with retrofit systems. " ...

Via Intermec: Intermec and Cascade Introduce Mobile RFID Forklift Adaptable Load Backrest for Rugged, Industrial Warehouse Use

RFID Adaptive Supply Chain Networks

SAP upgrades its transportation management functionality, as part of the mySAP Supply Chain Management (mySAP SCM) modules to support adapting business processes to optimize revenue across global trade operations. The upgraded software will support ocean shipping management and transportation planning through increased visibility and control of shipments globally. Transportation management costs will be reduced by making the business process more flexible and dynamic using real world aware practices, such as RFID technology. RFID technology integration into the adaptive supply chain will occur through SAP's NetWeaver platform. SAP reports that its existing transportation management software is used by more than 2,200 companies worldwide. This upgrade positions SAP as a strong competitor in the supply chain logistics software market. ...

... "Powered by the SAP NetWeaver platform and leveraging emerging technologies and real world aware practices - using technologies such as radio frequency identification (RFID) tags, smart cards and sensors - mySAP SCM transforms traditional, linear supply chains into adaptive supply chain networks to meet the challenges of rapidly changing market dynamics. These adaptive supply chain networks allow all participants, including suppliers and logistics providers, to sense changes in demand and supply conditions as they occur and to share the critical knowledge needed to respond intelligently. The result is an adaptive supply chain network that is not only demand-driven but can also leverage its assets to influence demand where appropriate. mySAP SCM offers a dynamic synchronization of demand-driven planning, logistics and network execution based on real-time information that provides the capability to synchronize supply with demand by balancing push and pull network planning processes and to replenish and produce based on actual demand; sense and respond with an adaptive supply chain network in which distribution, transportation and logistics are driven and integrated into real-time planning processes; and enable network wide visibility, collaboration and analytics across the extended supply chain. " ...

Via SAP: SAP Helps Companies Meet the Challenges and Reduce the Costs of Global Trade ...

RFID Starter Kit

Kanda offers RFID starter kit. The kit has a combined reader and programmer. It supports ISO15693 RFID Tags and will also read ISO14443A RFID tags. ...

... "Apart from a programmer and reader unit, the Kanda RFID kit includes an RF detector that gives an indication of the RF field strength near a reader, which helps both in development and in the siting of units. However, the most important part of the starter kit is the software package. The protocol used is very flexible to allow engineers to design their own systems to suit their needs, rather than being constrained by the limitations of the software. As well as the standard read, write and lock functions, the protocol allows for continuous read, and includes anticollision algorithms that deals with multiple tags in the reader field. " ...

Via Kanda: RFID Made Easy; New Starter Kit Simplifies Process of Creating Applications Using RFID Systems

RFID Asset Management Course

Course on RFID technology for asset management to be offered in the first quarter of 2007 at Univ of Kansas. Registration. ...

... "RFID for Intelligent Asset Management: Wednesday-Friday, February 28-March 2, 2007, Hampton Inn and Suites Country Club Plaza, Kansas City, Mo. This intensive three-day course will focus on radio frequency identification closed-loop applications for managing assets and controlling processes. Participants will learn to apply RFID to drive more flexible, lean manufacturing operations and to manage their assets more efficiently. Professionals from a wide variety of businesses-from heavy industry to healthcare-will benefit from attending this seminar. " ...

Via University of Kansas Continuing Education: RFID for Intelligent Asset Management Course

RFID Switch Infrastructure Convergence ...

Symbol integrates radio frequency switch to enable convergence of multiple technologies under centralized management solution, including RFID. This supports the consistent management of the radio frequency infrastructure for an enterprise, as most companies strive to implement RF devices for supply chain, wireless zones for mobility and flexible office work. ...

... "The RFS7000 RF Switch leverages Symbol's Wireless Next Generation (Wi-NG) architecture, and is designed to support and consolidate Wi-Fi and emerging RF technologies such as RFID, 802.11n, mesh, Voice over Wireless LAN (VoWLAN) and WiMAX. Businesses will now be able to efficiently and cost-effectively deploy and centrally manage wireless voice, data and infrastructure devices throughout the RF spectrum.

The RFS7000 RF Switch provides robust, highly scalable support for enterprise mobility, and is ideal for manufacturing facilities, hospitals, warehouse and supply chain industries, educational and government institutions, and service providers with high-bandwidth requirements and mission-critical applications.

The RFS7000 RF Switch is 802.11n-ready, capable of supporting up to 256 802.11a/b/g access ports, and enables a new switch clustering concept, providing redundancy and high-performance scalability for more than 2,000 access points. Symbol's new RF Switch is designed to support value-add, optional add-on modules such as fixed-mobile convergence (FMC) to provide seamless persistent connectivity for dual-mode cellular/Wi-Fi handheld devices. The RFS7000 Switch also enables Layer 3 roaming, without additional external applications and third-party servers, to handle multi-floor or large-scale campus-wide deployments, allowing mobile users to maintain a persistent connection to high-bandwidth applications as they roam throughout the enterprise. " ...

Via Symbol Technologies: Symbol Technologies Unveils the Industry's First RF Switch to Drive the Next Generation of Enterprise Mobility

RFID InkJet Printable Tags

FujiFilm Dimatix work to advance its capabilities in printable RFID tags using ink-jet printers. It has demonstrated capabilities in various sizes and materials on multiple substrates. ...

... "FUJIFILM Dimatix, Inc., a leading provider of commercial and industrial ink jet products, announced that it has repeatedly used its revolutionary ink jet technology to print silver fluid with features of less than 20 microns. With the proven capability to precision print 1 picoliter-sized drops of organic and inorganic materials on a large variety of substrates, the company is continuing to pave the way for an entirely new way of developing and manufacturing electronic books, printed polymer backplanes, printed sensors, complete RFID tags and other flexible electronics.

The Dimatix Materials Printer (DMP) is the world's first complete, low-cost system for high-precision jetting of all kinds of functional fluids on any type of surface, including plastic, glass, metal sheets, silicon, membranes, gels, thin films and paper. By directly printing on their own substrates, customers can rapidly develop prototypes and keep process technology in-house. The printer's small size and low price make it convenient, easy to use and cost-effective to own. Featuring single-use cartridges that customers can fill with their own fluid materials, the system minimizes waste of expensive materials. " ...

Via Dimatix: FUJIFILM Dimatix Enables Direct Printing of Silver Fluid with Features of Less than 20 Microns ...

FUJIFILM Dimatix Materials Deposition Division is evolving ink jetting technology into a production process that lowers the cost, time and environmental impact of producing electronic circuits and functions for RFID tags, flat panel displays, circuit boards and other electronic and bioscience applications.

RFID Antenna Plater: Europe

European semicon manufacturer reports significant RFID order ...

... "BE Semiconductor, a leading manufacturer of assembly equipment for the semiconductor industry, announced that the Company's Meco unit received an initial multi-million euro order for its newly developed Radio Frequency Identification Devices (RFID) Flexible Antenna Plater. The specific value of the order was not disclosed. List prices for such systems typically range between EUR1.5 million and EUR4.0 million depending upon the configuration. The order was placed by a major European industrial company for which delivery is anticipated in the first quarter of 2007. " ...

Via BE Semicon: BE Semiconductor Industries Receives Initial Order for RFID Flexible Antenna Plater ...

RFID Cold Chain Application 3PL: Third Party Logistics ...

Atlas Cold Storage implements Ship2Save RFID systems in a second phase of its cold chain. ...

... "As part of Atlas Cold Storage's RFID expansion initiative, Ship2Save has deployed yet another Radio Frequency Identification (RFID) system for the cold storage third party logistic provider (3PL). The 2nd deployment site is phasing in a superior Gen2 tag standard that has facilitated Atlas Cold Storage to have a more flexible operational process with the RFID tagging. As it stands, Ship2Save has deployed its RFID solution at 2 of Atlas Cold Storage's 55 facilities. This solution can easily and rapidly deployed at the other Atlas facilities. The Company strongly believes that this number will grow as more and more food and beverage manufacturers begin to adopt RFID as part of their supply chain. " ...

RFID Cold Chain Application 3PL: Third Party Logistics: Via Ship2save: Ship2save deploys second RFID solution for Atlas Cold Storage Inc. ...

RFID Industry Consolidation: Acquire Technology and Expertise ...

Consolidation in the RFID industry continues, as Sirit acquires technology and expertise. ...

... "Through the acquisition, Sirit launched its line of flexible plug and play RFID readers ideally suited to a number of closed loop applications including contactless/cashless payments, asset management, retail and high value product authentication, and inventory management. Sirit also strengthens its technological capabilities through the addition of a highly skilled engineering team and a broad based intellectual property portfolio. " ...

RFID Industry Consolidation: Acquire Technology and Expertise: Via Sirit: Sirit Inc. Completes Acquisition of TradeWind Technologies LLC ...

WIFI RFID System on Chip ...

G2 Microsystems introduces RFID system on a chip that supports WIFI networking standards. ...

... "G2 Microsystems Inc., a developer of integrated circuits for the Mobile Resource Management (MRM) market, announced an ultra low-power, active radio frequency identification (RFID) System-on-a-Chip (SoC) that leverages the widely-deployed Wi-Fi (IEEE 802.11) network infrastructure. By using this existing infrastructure, G2 Microsystems SoC enables businesses to install asset tracking systems at a fraction of the cost of today's solutions resulting in at least a 75% reduction in total cost of ownership. Additionally, the chip's integrated support for multiple location technologies and environmental sensing coupled with ultra low-power consumption enables a new class of tags that will open the door for global MRM services in many enterprise applications.

Mobile resource management is a fast-growing market that uses RTLS to track and monitor assets both inside and outside of facilities. The Yankee Group forecasts the global RTLS market will grow to $1.6B by 2010, fueled by deployments in healthcare, manufacturing and logistics. Targeted at the RTLS market, G2 Microsystems' G2C501 Wi-Fi Active RFID SoC is a very flexible solution that enables a broad range of customer types to tailor systems to their specific application at a very low total cost of ownership. The chip is currently being incorporated into leading RTLS solutions including those from Ekahau and PanGo Networks. " ...

WIFI RFID System on Chip: Via G2 Microsystems: G2 Microsystems Significantly Reduces Cost of Asset Tracking Systems with Industry's First Wi-Fi RFID System-on-a-Chip: Leading Real-Time Location System (RTLS) Providers, Ekahau and PanGo Networks, Plan to use G2 Microsystems' Chip ...

Bluetooth RFID Scanner ...

RightTag introduces Bluetooth-enabled 13.56 Mhz RFID scanner, which relieves users of the burden of wiring. ...

... "RightTag, Inc., a leading provider of comprehensive wireless and wireline RFID solutions, announced the availability of the industry's first 13.56 MHz wireless radio-frequency identification scanner with Bluetooth. The new scanner, BT RIGHTReader, offers users greater flexibility by eliminating the need for cumbersome wires and transmitting data to devices up to ten meters (~10 yards) away. RightTag also announced the RIGHTScanner, a compact and inexpensive RFID scanner designed for companies looking to increase security and control and monitor access, or to better track products. The 13.56 MHz BT RIGHTReader is an easy-to-use and durable wireless scanner that can transmit data from any RFID tag, including ISO 15693, ISO 14443, USB and Serial port communications, to any Bluetooth-enabled device. The device is battery operated, and is fully functional in temperatures varying from -20 Celsius (-4 Fahrenheit) to 55 Celsius (131 Fahrenheit). The 1MHz bandwidth antenna can read tags as far as 16 centimeters (~6 inches) away and transmits to a Bluetooth receiver up to ten meters' distance, making BT RIGHTReader the most robust and flexible RFID offering available in the market. " ...

Bluetooth RFID Scanner: Via RightTag Inc.: RightTag Unveils BT RIGHTReader, Industry’s First Bluetooth RFID Scanner ...

Plastic RFID Electronics Demonstrated by Philips

Philips Research crew demonstrates RFID electronic based on plastic ...

... "Scientists at Philips Research have created a fully functional 13.56 MHz RFID tag based entirely on plastic electronics. In contrast to conventional silicon-chip-based RFID tags, a plastic electronics RFID chip can be printed directly onto a plastic substrate along with an antenna without involving complex assembly steps. This could pave the way for the packaging industry to replace existing barcodes by a low-cost RFID tag that provides individual packages with a unique item-level identification code - something not feasible with current barcode technology.

Radio Frequency Identification (RFID) is an automatic identification method, based on remotely retrieving information via radio waves from miniature electronic circuits called RFID tags. Philips has now realized the first plastic-electronics-based tag that is capable of transmitting multi-bit digital identification codes at 13.56 MHz � the dominant industry-standard radio frequency for RFID tag applications. As an additional demonstrator for the technology, scientists at Philips Research have also developed a 64-bit code generator, showing the practicality of building plastic electronic circuits with the complexity required for item-level tagging.

Performance results for these circuits will be presented at this year's International Solid-State Circuits Conference (ISSCC, February 5-9, San Francisco, CA, USA) in a paper that will also be awarded the conference's Beatrice Winner Award for Editorial Excellence. Being a world leader in the RFID business, Philips supplies silicon-based components for applications such as supply chain management, public transport, pharmaceuticals and animal tracking. Current silicon-based tags have excellent performance, and when produced in volume, can be manufactured at low cost. Philips is also conducting research into plastic-electronics-based RFID tags, since these tags have the potential to be manufactured in a radically different way, namely via even lower-cost reel-to-reel and other in-line processing techniques. " ...

Plastic RFID Electronics Demonstrated by Philips: Via Philips: Philips demonstrates world-first technical feasibility of 13.56-MHz RFID tags based on plastic electronics ...

Additional references on plastic RFID technology:

German researchers move forward on plastic RFID chip - Via Computerworld: "By 2008, PolyIC hopes to have a chip with a storage capacity of 128 bits and a processing speed of 13.56 MHz to comply with radio frequency identification (RFID) standards, according to Mildner. "

Beyond Bar Codes: Tuning up plastic radio labels: Via Science News: "Electronic labels made from plastic semiconductors can now pick up and respond to radio signals at a frequency suitable for use on products. "

OrganicID, Inc.: Printable, Plastic RFID Tags: "Organic Transistors - The Pros: Compatibility with flexible plastic substances, Lower temperature manufacturing (60-120°C), Lower-cost printable deposition processes "

RFID Forklift of the Future ...

Intermec and Cascade collaborate to develop an RFID technology-enabled forklift ...

... "There's more to a forklift than first meets the eye. In the emerging world of RFID-enabled inventory tracking, the forklift can become a powerful supply-chain information tool. Intermec Inc., an RFID pioneer and leading supplier of Gen 2 RFID technology and equipment, and Cascade Corp., the world's largest manufacturer of forklift attachments, are teaming to develop a forklift system that incorporates RFID technology into a forklift's very infrastructure, replacing today's cumbersome and inefficient bolt-on approach to data collection.

Forklifts envisioned by Cascade and Intermec incorporate powerful dashboard computers positioned for maximum safety and efficiency, easy-to-reach RFID controls assimilated into the lift's control mechanisms, wireless real-time location tracking and navigational LEDs for optimal routing, and easy-to-adjust RFID readers designed into the frame of forklift attachments for flexible and accurate use with a wide range of goods and supplies. The system, designed specifically for the rugged environment of daily warehouse use, also engineers in a sophisticated cable management system, state-of-the-art wireless scanning capabilities and a built-in camera for cargo documentation. Cascade and Intermec unveiled a prototype future forklift today at Intermec's 2006 Global Partner Conference in Dallas. " ...

RFID Forklift of the Future: Via Intermec: Intermec and Cascade Collaborate to Create RFID Forklift of the Future to Enhance Warehouse Worker Productivity and Efficiency ...

Printed RFID Ink Viscosity ...

NanoMarkets explores the market for inks and materials that are used to enable printable electronics, such as printed RFID. ...

... "Some of the highest potential applications for printable electronics have very demanding requirements for materials. For example, flexible displays obviously require flexible substrates, but they also need inks that do not easily crack when dry. Printed RFIDs will be created on high-speed printing machinery which places strict requirements on ink viscosity. NanoMarkets believes that such needs will help drive both the demand and R&D dollars in the novel inks sector. " ...

Via NanoMarkets: Materials for Printable Electronics to Reach $1.9 Billion Says New Report from NanoMarkets ...

Printed RFID electronic ink references:

Via Organic Matter: RFID, OLED, Organic Semiconductors and Electronic Ink: "Because of the new and exciting developments in organic semiconductor technology called Electronic Ink. Imagine if you will an extremely precise inkjet printer that instead of regular ink could print using an organic semiconducting polymer. In theory one could print out a RFID or any other number of electronics directly onto paper. Besides RFID tags there are a whole host of other consumer electronics that are currently being developed such as Organic Light Emitting Diodes (OLEDs)."

Via Flint Ink: Flint Ink Launches PRECISIA, LLC: New Company to spearhead RFID and other printed electronics technology: "Conductive inks, which contain particles of conductive silver and/or carbon, can serve as channels for the wireless flow of electronic signals. The most well-known application for conductive inks is in antennas for RFID, a next-generation coding technology. Conductive inks are also used in 'smart' labeling and packaging applications. "

Via Dimatix: Dimatix Revolutionizes Materials Deposition with Industry’s First Low-Cost, Cartridge-Based Ink Jet Printing System: Direct Deposition of New Fluid Materials Offers Easier, Faster and Less Expensive Product Development for Electronics, Flat Panel Displays, Life Sciences and Other Industries: "The patented DMP-2800 series - a bench-top precision digital materials deposition system with versatile capabilities - enables users to jet complex patterns to create desired shapes, layers or even products by printing their own fluids onto any substrate up to five centimeters in thickness. By directly printing on their substrates, customers can rapidly develop prototypes and keep process technology in-house. The printer's small size and low price make it convenient and easy to use and own. The user-friendly cartridge system allows customers to perform print and deposition functions without having to become fluid jet experts."

Library RFID: New Zealand Town Leads ...

Manukau city in New Zealand leads in the application of RFID in libraries and expects to increase adoption. ...

Library RFID: New Zealand Town Leads: Via Stuff.co.nz: Wider use of RFID likely in libraries ...

... "RFID pioneer Manukau City Council will consider extending its use of the much talked about technology so it can electronically track books in all its libraries. Libraries manager Chris Szekely says a study of Botany Downs Library, which became the first in New Zealand to introduce RFID (radio frequency identification technology) in October last year, supports the move. " ...

The use of RFID in library processes can have a positive impact on quality, throughput, and efficiency. ...

Via ALA: Richard W. Boss on RFID Technology for Libraries ...

... "RFID security and the tracking of materials throughout the library; or it is a hybrid system that uses EM for security and RFID for tracking, but handles both simultaneously with a single piece of equipment. [3M has developed readers that can do both concurrently except for videotapes and audiotapes. These have to be desensitized and sensitized in a separate operation]. In either case, there can be as much as a 50 percent increase in throughput. The time savings are less for charging than for discharging because the time required for charging usually is extended by social interaction with patrons. " ...

Vendors that focus on RFID library systems continue to innovate in the field. ...

Via Bibliotecha RFID Library System: New RFID Handheld Reader improves mobile inventory control ...

... "The data exchange via radio waves provides new possibilities for a mobile inventory control. Bibliotheca RFID Library Systems has now developed a specific RFID handheld reader – called BiblioWandTM – which can be used to maintain the complete inventory in the shelves. For the reader, there is no difference in the processing of books, VHS cassettes, CDs and DVDs. Only the attachment of all material with programmed BiblioChip® RFID labels is required. " ...

There will be challenges in the deployment of RFID in library applications, such as the facility, the age of the collection, and other environmental considerations. ...

Via Libramation: Libramation's RFID technology protects the valuable collection of the Zottegem Library ...

... "The introduction of RFID technology in the Castle a decade later posed unique challenges. Building elements like stone flooring made the physical installation problematic. Melding new technology into the interior design of the library was a high priority. Finally, the new system would need to be flexible, easy to use and adhere to international technology standards. The Libramation solution (installed by Kno-Tech, its sister company in Europe) exceeded all expectations. " ...

Here are a few vendors that specialize in RFID library applications. ...

Bibliotheca is specialized in designing, producing and marketing of RFID systems that is hard- and software for library automation and media security. In Europe the BiblioChip® System is the Number One RFID Library System. Bibliotheca was formed to exclusively focus on the needs of librarians. The BiblioChip® RFID Library System is the result of what librarians have requested.

Libramation is positioned as a leader in library automation equipment technology and ergonomic work environments. We take pride in knowing that our systems and service are continually evolving to meet the needs and expectations of our clients. With its new office in Utah Libramation continues to expand its sales and marketing efforts in the United States. Libramation headquarters is in Edmonton Alberta Canada and has a sister company, Kno-Tech, the Netherlands. The company's contemporary and functional automation products have progressed from front of the house Easy-Check units, to automated return and sorting systems, and our latest, the Lib-Chip RFID Library and Self Check solutions. Libramation systems are in use at libraries in Arizona, Arkansas, California, Connecticut, Minnesota, New Hampshire, New York, New Jersey, Ohio, Oregon, Texas, Washington, Wisconsin and throughout Canada.

RFID Tags: Material Deposition System ...

RFID Tags: Material Deposition System: Via Dimatix: Dimatix Presents DMP-2800 – A Revolutionary Materials Deposition System: Industry’s First Low-Cost, Cartridge-Based Ink Jet Printing System Offers Easier, Faster and Less Expensive Product Development for Electronics and Flat Panel Displays ...

... "The turnkey system is an easy to use tool for corporations and research institutes to quickly develop and test processes and prototypes, as well as conduct low-volume manufacturing of a broad range of products, including flexible circuits, RFID tags, displays and wearable electronics. " ...