Intermec RFID China Certified

China certifies Intermec's RFID equipment. ...

... "Intermec's passive ultra high frequency (UHF) RFID (radio frequency identification) readers are the first RFID hardware to be certified for operation in China by the country's State Radio Regulation Committee (SRRC). Part of China's Ministry of Information Industry (MII), the SRRC ensures that products sold for use in China meet the country's standards for radio frequency devices. The committee requires compliance testing for RFID devices before they receive the necessary certification. Test results must conclude that RFID hardware meets China's newly released RFID bandwidth and standards requirements. " ...

Via Intermec: Intermec RFID Hardware First to be Certified for Use in China

Chemical Industry RFID Use

Chemical Industry Data Exchange (CIDX) explores RFID use in its white paper, Chemical eStandards Initiative on Radio Frequency ID. ...

... "An outline of how CIDX will collaborate with EPCGlobal, an RFID industry trade group focused on RFID technologies and standards; A Business Value Model for determining return on investment (ROI) based on common chemical business scenarios; A method for providing input and exchanging critical information that will affect ongoing RFID standards development. " ...

Via CIDX: RFID Use in Chemical Industry

RFID Discovery Services

Afilias will offer its Discovery Services for free to RFID supply chain pilot programs through 2007. ...

... "Afilias Discovery Services provide a unique standards-based solution that companies can implement to link their supply chain partners to historical information concerning the life cycle of RFID tags, while still keeping competitive data secure. " ...

Via Afilias: Free Discovery Services for RFID Pilots

China RFID AIAG AIM Collaborate

The Automotive Industry Action Group (AIAG) and the Automatic Identification Manufacturer Association of China (AIM of China) will collaborate on automatic identification (auto ID) technologies to support the North American and Chinese automotive industries. ...

... "Under the agreement, both organizations will make a united effort to meet their respective members’ needs for industry standards and guidelines, common business practices and supply chain technology in auto ID. The agreement will initially focus on the exchange of information on auto ID initiatives currently underway by the two organizations." ...

Via AIAG: AIAG to Collaborate with AIM of China on Automatic Identification Technologies (PDF) ...

RFID Barriers to Pharma Adoption: Cost Benefits Standards

Health Industry Insights shares survey findings that identify the top barriers to pharma industry's adoption of radio frequency identification (RFID). 143 life sciences industry leaders point to technology cost, lack of ROI and standards as the barriers. ...

... "The report goes on to spotlight the slower-than-expected RFID adoption with additional survey findings. Results reveal less than one in five (16%) pharmaceutical companies are currently evaluating the benefits of RFID technology, and even fewer (15%) companies adopting RFID in some capacity. Overall, the report indicates average life science company spend on RFID technology is approximately $25,000, although this level is expected to triple to $75,000 over the next 12 months. Additionally, the report discusses read rate results from commercial RFID pilots in the pharmaceutical industry. The report reveals that initiatives utilizing high-frequency (HF) technology for item-level tagging are achieving better read rates than those using ultra-high frequency (UHF). Findings show initiatives using HF are experiencing read rates in the Four to Six Sigma (a well-know management practice used to help companies achieve exceptional performance levels) range, and exceeding Six Sigma in some cases, whereas those using UHF are typically between Three and Four Sigma. " ...

Via Health Industry Insights: Pharmaceutical Industry's Top Roadblocks to RFID Adoption ...

Checkpoint RFID Metro Pilot Implementation Solves Technical Challenges

Checkpoint Systems is involved in pilot of UHF RFID technology at METRO Group's Distribution Centres near Hamm, Germany, under supervision of the European Telecommunications Standards Institute (ETSI) task group 34 (TG34). The European Telecommunications Standards Institute (ETSI) plays a major role in the global standardization of Information and Communication Technologies. This pilot has been created to improve the read performance of RFID tags in a high-density UHF reading environment and validate the performance of portal dock door solutions. The successful pilot solves UHF RFID challenges and supports Metro's plan to implement RFID more broadly in 2007. The Metro RFID implementation is aimed at enhancing customer service and increasing the efficiency of its supply chain. METRO Group is an international retailing company with 2005 sales of EUR55.7 billion. The company has a headcount of about 250,000 employees and operates more than 2,200 outlets in 30 countries. ...

... "Utilizing equipment from numerous RFID suppliers in Europe and North America, Checkpoint served as a hardware integrator for the trials. In this capacity, Checkpoint helped with the design work for the hardware solution and procurement, configuration and installation of the 36 RFID-enabled dock door portals which were used to validate successful simultaneous operation of multiple dock doors using a 4-channel synchronized approach under the ETSI 302 208 standard. Pallets containing 62 individually tagged cases largely containing RFID unfriendly materials (such as cans, liquids and metal lined items) were simultaneously transported at warehouse speeds through 36 adjacent loading dock doors. Some 4.5 million individual reads were recorded over the course of the trials. Complying with the ETSI listen before talk (LBT) requirements, the tests achieved a 98.5%+ read rate simultaneously from multiple pallets as they were wheeled through the dock doors. " ...

Via Checkpoint Systems: Checkpoint Systems Partners with Metro Group to Successfully Deploy UHF RFID Dock Door Solution: 98.5%+ Read Rate Represents Milestone in European RFID Deployment ...

Hospital RFID Realizes Patient Benefits

HP and Precision Dynamics implement patient management system based on radio frequency identification (RFID) technology in Taiwan at the Chang-Gung Memorial Hospital (CGMH). The hospital CIO sees the hospital realizing benefits through a reduction in medical errors, from root causes such as manual processes, compliance to standard operating procedures, and visibility to real-time patient status and medical process exceptions. The system is architected with PDC's RFID wristbands and HP's mobile and fixed RFID infrastructure. Privacy is managed by storing confidential patient information on the RFID chip rather than printing the information on the wristband. ...

... "CGMH implemented the RFID system in its operating rooms to improve patient safety by verifying and positively identifying patients, gathering real-time data, reducing risk of wrong-site and/or wrong-patient surgery, and ensuring compliance with hospital patient safety procedures or standard operating procedures. Since the implementation, CGMH has achieved 100% accuracy in patient ID in the OR. The new RFID system automates many manual functions of the previous operating room processes. The system helps verify that the five rights of medication safety are met - right patient, medication, dose, time, and route - as well as right surgery and surgical site. Automating patient data verification processes has saved CGMH medical staff an average of 4.3 minutes per patient. Also, automated data collection has helped prevent common manual data entry mistakes, which if gone undetected could lead to medical errors." ...

Via HP: Precision Dynamics Corporation and HP Provide Chang Gung Memorial Hospital with RFID System for Patient Management

RFID Drug Authentication eCustoms

IBM announces solution that provides ability to share and analyze real-time RFID sensor data to enable drug authentication and e-customs for clients in the pharmaceutical value chain. ...

... "The new technology, WebSphere RFID Information Center, is based on a recently completed EPCglobal standard called EPCIS, which provides a standard way to securely communicate the data created by sensors and RFID tags, and tie it to existing business information and trading partners. The growing trend of item-level tagging will create exponential growth in sensor data well beyond that generated from conventional barcode technology. This creates a need for a new way to manage this explosion of data in a manner that does not overwhelm a business and its supply chain partners. In addition to managing the massive amount of data RFID creates, two other barriers to widespread RFID adoption to date have been the lack of standards and data sharing capabilities. RFID Information Center solves all of these issues, clearing the way for wider-spread RFID adoption in various industries.

The IBM WebSphere RFID Information Center has already been successfully deployed for a number of early-adopter IBM clients across several industries, including consumer packaged goods company Unilever, the e-customs project ITAIDE in Europe, and Big Three pharmaceutical distributor AmerisourceBergen. " ...

Via IBM: IBM Enables Drug Authentication, E-Customs With Release of New RFID Technology ...

RFID Starter Kit

Kanda offers RFID starter kit. The kit has a combined reader and programmer. It supports ISO15693 RFID Tags and will also read ISO14443A RFID tags. ...

... "Apart from a programmer and reader unit, the Kanda RFID kit includes an RF detector that gives an indication of the RF field strength near a reader, which helps both in development and in the siting of units. However, the most important part of the starter kit is the software package. The protocol used is very flexible to allow engineers to design their own systems to suit their needs, rather than being constrained by the limitations of the software. As well as the standard read, write and lock functions, the protocol allows for continuous read, and includes anticollision algorithms that deals with multiple tags in the reader field. " ...

Via Kanda: RFID Made Easy; New Starter Kit Simplifies Process of Creating Applications Using RFID Systems

RFID Pilot: Cardinal Health Completes

Cardinal Health completes its RFID pilot, which tested RFID tags for end-to-end pharma packaging and distribution business processes. The pilot tested the application of tags and the utilization of item level tracking techniques. Alien Technology, IBM, and Verisign provided hardware, software and implementation services. The application and encoding of the RFID tags approached 100 percent success rates. Reliable read rates were best achieved at the individual case level. The pilot was a fruitful learning experience for the pharma industry. ...

... "The pilot program tested whether ultra-high frequency (UHF) radio frequency identification (RFID) tags could be applied, encoded and read at normal production speeds during packaging and distribution of pharmaceuticals. Verifying the authenticity of medications along each step of the distribution process adds an additional layer of security to lessen the chance of counterfeit pharmaceuticals entering the supply chain. It is also hoped that RFID data could improve efficiencies in the supply chain. Pilot Program Background: In conducting the industry's first end-to-end pilot program, Cardinal Health used new technology to place RFID tags on the labels of brand-name solid-dose prescription drugs, then encoded the electronic product code (EPC) standard data at the unit, case and pallet levels during the packaging process. The products were shipped to a Cardinal Health distribution center in Findlay, Ohio, where the data was read and authenticated as products were handled under typical operating conditions. Normal procedures were enhanced with RFID hardware and software from Alien Technology Corporation and IBM along with project management support from VeriSign.

RFID Labeling and Online Encoding: Data collected from the pilot suggest that it is feasible for RFID tags to be inlaid into existing FDA-approved pharmaceutical label stock, and the tags can be applied and encoded on packaging lines at normal operational speeds. Online encoding yields were 95 percent to 97 percent, and fine tuning of the process is expected to produce yields that approach 100 percent. The RFID tag application and encoding requires minimal adjustments to current labeling and packaging lines.

RFID Read Rates: Unit-level read rate data varied widely depending on the locations and type of reading stations throughout the supply chain. Highly reliable unit-level read rates in excess of 96 percent were found when reading individual cases one at a time and when reading units mixed with other products in tote containers prepared for delivery to a pharmacy. However, as expected, unit-level read rates were not found to be reliable when attempting to read units within a full pallet of product. " ...

Via Cardinal Health: Cardinal Health Releases RFID Pilot Results ...

Savi RFID: China Ready

China State Radio Regulation Committee (SRRC), a division of the China Ministry of Information Industry, grants Savi Tech approval to implement its family of active Radio Frequency Identification (RFID) products throughout the country. Savi's tags and readers are compatible with the ISO 18000-7 (International Standardization Organization) standard for active RFID products. ...

... "By approving Savi's hardware equipment, China has authorized the use of active RFID products compatible with ISO-18000-7. These product approvals in China, combined with similar prior approvals in North America, South America, Europe and Pacific Rim markets such as Australia, Korea, Taiwan, Singapore, and Hong Kong, clearly show the solid support for the 433 MHz frequency as the worldwide choice for active RFID, Jennings said. Following extensive testing and document reviews, SRRC has issued Savi Technology a Radio Transmission Equipment Type Approval Certificate and Code for five of the company's flagship hardware products, including tags, readers and signposts. " ...

Via Savi Technology: SAVI TECHNOLOGY'S ACTIVE RFID SUPPLY CHAIN PRODUCTS APPROVED FOR USE IN CHINA ...

RFID ePassport Vulnerable ...

Flexilis describes a number of vulnerabilities in the US ePassport and makes recommendations to increase security of the data. ...

... "Starting October 2006, new U.S. passports will contain RFID (Radio Frequency Identification) chips which hold an individual's picture and personal information. These chips can be read wirelessly from a distance of several feet. In order to prevent thieves from stealing sensitive personal data, the State Department has included several security measures in the proposed passport standard. " ...

Via Flexilis: e-Passport Vulnerability

RFID Out-of-Box Solution: SMB Market

Intermec partners to create an out-of-box RFID compliance experience for suppliers to the retail industry and the Department of Defense. This is especially critical for small and medium sized businesses (SMB market) as this RFID kit enabled them to accelerate their RFID compliance efforts. The kits include everything required to meet RFID compliance mandates, generate and apply Generation-2 RFID tags, and verify tag information. This is a time-saver as it enables an SMB customer to accelerate to the integration testing phase. ...

... "To generate a label, customer order information and the customer-stipulated label format is transmitted by the Intermec portable terminal to the PM4i printer's on-board encoder, which translates the information and prints it into an RFID-readable tag, barcode or human readable label. The printer's embedded reader then scans and verifies the tag's information before it is placed on a carton or pallet. The Intermec 751, operating with an attached IP4 portable reader, or the IF5 fixed RFID reader then re-verifies the order information and confirms shipment. The Informs kit comes with stand-alone PC-based compliance software that includes all standard retail and DOD-compliant label formats, so users have easy and immediate access to compliant label formats. The software can act as a stand-alone shipping application and interoperates with all ERP software for complete system integration. A key component of the system, EPC Solutions' Tag Manager software contains GTIN and SSCC smart labels information and allows users to immediately begin shipping cases and pallets with standards-compliant, up-to-date labeling. " ...

Via Intermec: Intermec and Informs Deliver Affordable, Streamlined RFID Compliance Kit

RFID Battery-Assist Passive Tag: Supports Logistics and Manufacturing ...

Intelleflex RFID tags can be used by logistics companies and in manufacturing in long-range, battery-assisted mode for real-time inventory tracking of assemblies in the warehouses. The RFID system can automatically generate a proof of shipment when assemblies are shipped. When used in maintenance operations in passive mode, companies can realize significant benefits from having actionable manufacturing and repair history data in the 64Kb user memory of the RFID tag at the point of use. ...

... "Intelleflex's InfoSure tags and the I-Beam reader are multi-protocol, ensuring global interoperability using EPC standards. InfoSure tags can be used as passive C1G2 tags with any other C1G2 reader or used in the battery-assisted passive mode at long ranges with the I-Beam reader. InfoSure tags offer up to 100-meter read/write range in free space, which translates to 100 percent read/write reliability at standard working ranges in industrial environments. They also offer 64 kb user memory, which is segmented into 1 kb blocks so they can be independently protected for read/write access through passwords. The I-Beam reader can read any EPC C1G2 tag as well as the Class 3 InfoSure tag. Initial product shipments of both the tags and readers are targeted for asset management, yard management, manufacturing and zonal access control applications. " ...

Via Intelleflex Corporation: Intelleflex Announces Availability of its RFID Battery-Assisted Passive Tag and Reader Products ...

RFID ePassports: Inlays Shipping ...

SmarTrac passes significant milestone in the sales of its RFID imlays for electronic passports, or ePassports. ...

... "SMARTRAC, the inventor of inlays for electronic passports, is the first company worldwide to ship more than ten million ePassport inlays to its customers. SMARTRAC is the world’s largest supplier of inlays for ePassports and is benefiting from the accelerating introduction of electronic passports. The company has been listed in the Prime Standard of the Frankfurt Stock Exchange since 20 July 2006, and recently registered DURASOFT as a trademark with the US Patent and Trademark Office. DURASOFT is a novel multi-layer inlay material specially developed for ePassports. " ...

Via SmarTrac: SMARTRAC ships 10th million ePassport inlay and is the world’s largest supplier for electronic passports ...

RFID Middleware: Automate Integrate ...

Reltronics Technologies has made their system, SmartInstrument, a versatile middleware for automatic Radio Frequency Identification (RFID) systems, widely available in the marketplace. Reltronics strengths lie in automation and identification using remote RFID technology. The SmartInstrument middleware system plays a role in supporting interoperability and integration of multiple, potentially incompatible, solutions. ...

... "One of Reltronics Technologies' fortes is in creating and supporting RFID systems that assist in automating asset and inventory management, identifying drug pedigrees, etc. and which rely upon storage and remote retrieval of data using RFID hardware (Readers, Antennas, Tags or Transponders). Retailers such as Wal-Mart and Target have whole-heartedly accepted the RFID concepts to implement efficiencies in their workflow and to limit inventories in their warehouses and they have subsequently initiated mandates to their vendors to implement RFID technology in their supplies within set timelines. These mandates are allowing shorter timelines and the industry not only needs many new deployments but also sustain existing deployments. SmartInstrument is a step forward to facilitate transparency in the RFID systems deployment thereby bringing commonality between various RFID protocols and hardware technologies (reader, antenna, and transponders or RFID tags), irrespective of the technology being new or old.

For instance, SmartInstrument enables end-users to deploy new RFID systems while seamlessly supporting all existing RFID systems and eliminating the need for single- sourcing thereby achieving a better return of investment. It fills the need by interpreting any RFID system utilizing any reader (Active, Passive), working on any frequency (LF, HF, VHF, UHF), with any communication protocol (Ethernet, WiFi, RS-232, RS-485), any transponder (Active, Passive), and any standard (EPCGlobal, ISO, AIMGlobal) bringing the much needed commonality into the RFID infrastructure. Reltronics Technologies' focus on bringing interoperability and sustainability into the RFID technology environment is the result of industry satisfaction with the RFID initiative, to enable overcoming the customer perception of which RFID technology to deploy, to enable commonality between the various RFID protocols, to enable a more cost-effective RFID system deployment, and finally to allow the end-users to start small with one RFID system and expand at their own financial pace without having to worry about the RFID system being antiquated. " ...

Via Reltronics: A Novel Idea to Harmonize Automatic Radio Frequency Identification (RFID) Systems ...

RFID Cargo Terminal Operational: Chain of Custody ...

Savi implements RFID-enabled chain of custody process at the Port of Felixstowe (PFL) in the UK. The system, called SaviTrak, automates the tracking of cargo as it is processed through the supply chain, while monitoring security. ...

... "Network infrastructure, including SaviTrak software and Radio Frequency Identification (RFID) readers, are now installed and operational at PFL's Trinity Terminal, the largest cargo-handling facility in the United Kingdom. The readers, which are placed on dockside cranes and at entry and exit gates, automatically capture chain of custody handoff points for containers equipped with international standards-based RFID tags. The real-time data is routed to the web-based network software, which transforms it into actionable information that enables SaviTrak customers to make better supply chain decisions. The SaviTrak information service is offered via an open technology platform, which accommodates multiple and interoperable Automatic Identification and Data Collection (AIDC) technologies, such as barcodes, EPC-compliant passive and active RFID technologies, and Global Positioning Systems (GPS) used to track ships and trucks that transport ocean containers. Active RFID technologies used are compatible with the ISO 18000-7 standard, and sensor seals are compatible with the ISO 18185 draft standard. " ...

Via Savi Technology: SAVI NETWORKS EXTENDS SAVITRAK REAL-TIME INFORMATION NETWORK TO UNITED KINGDOM'S PORT OF FELIXSTOWE ...

Monza RFID Tag Readers Gen2 Interoperable ...

Impinj's Monza RFID chip and Speedway readers are certified for Generation-2 interoperability. ...

... "Leading Gen 2 RFID solution provider, Impinj, Inc., announced that EPCglobal Inc., the not-for-profit standards organization dedicated to driving global adoption of the Electronic Product Code (EPC) for supply chain excellence, has awarded interoperability marks to Monza tag chips and Speedway readers, certifying th